Poulan 530087857 manual Removing a Pinched SAW, Limbing, SAW Hung in the LOG

Page 10
PRUNING
WARNING:

Using a support stand

 

 

2nd Cut

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1st Cut

 

 

 

 

 

 

Using a support stand 1st Cut

2nd Cut

REMOVING A PINCHED SAW

(A SAW HUNG IN THE LOG)

SIf saw becomes pinched or hung in a log, don’t try to force it out. You can lose control of the saw resulting in personal injury and/or damage to the saw. Stop the saw and drive plastic or wooden wedge into the cut until the saw can be removed easily.

SRestart the saw and carefully reenter the cut. To avoid kickback and chain damage, do not use a metal wedge. Do not attempt to restart your saw when it is

pinched or hung in a log.

Use a wedge to remove pinched saw

Turn saw OFF and use a plastic or wooden wedge to force cut open.

LIMBING AND PRUNING WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

S Watch out for springpoles. Use extreme caution when cutting small size limbs. Slender material may catch the saw chain and be whipped toward you or pull you off balance.

S Be alert for springback. Watch out for branches that are bent or under pres-

sure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only then can limbing be done safely and properly.

Leave the larger limbs underneath theS

felled tree to support the tree as you work.

S Start at the base of the felled tree and work toward top, cutting branches and limbs. Remove small limbs with one cut.

SKeep the tree between you and the chain. Cut from the side of the tree op- posite the branch you are cutting.

Remove larger, supporting branchesS

with the 1/3, 2/3 cutting techniques de- scribed in the bucking section.

S Undercut 1/3 of the way through the log.

S Finish with an overcut.

SAlways use an overcut to cut small and freely hanging limbs. Undercutting could cause limbs to fall and pinch saw.

Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or ob- jects at the nose of the guide bar when limb- ing or pruning. Allowing such contact can result in serious injury.

S Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a profes- sional to do the job.

S See illustration for the pruning technique.

S Make your fist cut 1/3 of the way through the bottom of the limb.

S Next make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch collar from the truck of the tree.

Second cut

Third cut

Collar

First cut

Pruning technique

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Advertencia Operate Your SAW Safely Clothing Gloves Safety Sa fety Chaps ShoesPlan Ahead Maintain Your SAW in Good Working OrderAvoid Pinch---Kickback KickbackReduce the Chance Kickback Avoid Pull---InMaintain Control Attaching the BAR & Chain If not Fueling Engine Adjusting the tensionChecking the tension BAR and Chain LubricationImportant Points Ignition SwitchImportant points to remember ChokeNotch CUT and Felling the Tree Tree Felling TechniquesFelling Large Trees Plan a clear retreat pathTypes of Cutting Used for Bucking Bucking Using a LOG or SUP- Port StandCutting a Fallen Tree Bucking Without a SupportLimbing Removing a Pinched SAWSAW Hung in the LOG Chain Sharpening BAR MaintenanceAIR Filter Ignition TimingNeed Assistance? Need Service Parts?Days Service centers Where To GETWarranty Service Warranty services Maintenance Placement and Repair of Emission

530087857 specifications

The Poulan 530087857 is a standout product in the realm of outdoor power equipment, particularly designed for those who seek reliability and efficiency in their lawn care routine. This model incorporates advanced features and robust technologies that make lawn maintenance a breeze, whether you are a professional landscaper or a dedicated homeowner.

One of the key features of the Poulan 530087857 is its powerful engine, which is engineered to provide high performance and consistent power delivery. The engine is built with a focus on fuel efficiency, allowing users to complete their tasks without frequent refueling interruptions. This not only saves time but also enhances productivity, making it an essential tool for larger lawns and gardens.

The ergonomic design of the Poulan 530087857 ensures comfort during operation. Its lightweight frame and balanced construction reduce fatigue, ensuring that users can maneuver the equipment with ease. The handles are designed for optimal grip, featuring anti-vibration technology that minimizes discomfort during extended use. This allows for longer working sessions without compromising on comfort.

One of the standout technologies integrated into the Poulan 530087857 is its easy-start mechanism. This innovation eliminates the hassle often associated with starting outdoor power equipment, providing users with a hassle-free experience. Combined with a reliable ignition system, this feature ensures that the machine starts promptly every time, saving time and frustration.

The Poulan 530087857 also boasts a user-friendly interface, making it accessible to individuals of all experience levels. Clear controls and indicators allow for easy adjustments, enabling users to customize their cutting experience based on the specific needs of their lawns.

Moreover, this model is designed with durability in mind. Constructed from high-quality materials, the Poulan 530087857 can withstand the rigors of outdoor use. Its components are engineered to resist wear and tear, ensuring longevity and minimizing the need for frequent maintenance.

Finally, the Poulan 530087857 is an environmentally-conscious choice. The engine meets stringent emissions regulations, contributing to a cleaner environment while delivering the performance users expect.

In summary, the Poulan 530087857 combines power, comfort, and advanced technology to create an exceptional outdoor tool that meets the needs of any lawn care enthusiast. Whether you're tackling tough overgrowth or maintaining a manicured lawn, the Poulan 530087857 is engineered to deliver results with ease and efficiency.
Top Page Image Contents