Poulan 530087857 manual Important points to remember, Important Points, Ignition Switch, Choke

Page 7

WARNING: The chain must not move when the engine runs at idle speed. If the chain moves at idle speed refer to CARBURE- TOR ADJUSTMENT within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns.

To stop the engine move the switch to the STOP or OFF position.

To start the engine hold the saw firmly on the ground as illustrated. Make sure the chain is free to turn without contacting any object.

Use only 15”---18” of rope per pull.

Hold saw firmly while pulling starter rope

Important points to remember

When pulling the starter rope, do not use the full extent of the rope as this can cause the rope to break. Do not let starter rope snap back. Hold the handle and let the rope rewind slowly.

NOTE: Do not attempt to cut material with the fast idle lock button in the locked posi- tion.

For cold engine or warm engine after running out of fuel:

SMove switch to the START or ON posi-

tion.

S Pull choke knob out to the full extent. S Slowly press primer bulb six times.

S Squeeze and hold throttle trigger. With thumb press fast idle lock down; then release throttle trigger.

S Sharply pull the starter rope handle 5 times with your right hand.

S Fully push in choke knob; pull the start- er rope until the engine starts.

S Allow the engine to run for approxi- mately five seconds. Then, squeeze and release throttle trigger to allow en- gine to return to idle speed.

Fast idle lock down

IGNITION SWITCH

SIDE VIEW

ON

STOP

CHOKE

(SIDE VIEW)

 

Choke Knob

 

 

 

 

 

 

OFF FULL

 

 

For a warm engine:

 

 

 

 

 

S

Fully push in choke knob.

S Move switch to the START or ON posi- tion.

S Slowly press primer bulb six times.

S Squeeze and hold throttle trigger. With thumb press fast idle lock down; then release throttle trigger.

S Sharply pull the starter rope with your right hand until the engine starts.

S Squeeze and release throttle trigger to allow engine to return to idle speed.

Difficult starting or flooded engine:

The engine may be flooded with too much fuel if it has not started after 10 pulls. Flooded engines can be cleared of excess fuel by following the warm engine starting procedure listed above. Insure the ignition switch is in the ON or START position. Starting could require pulling the starter rope handle many times depending on how badly the unit is flooded. If engine fails to start, refer to troubleshooting chart or call 1-800-554-6723.

IMPORTANT POINTS

SCut wood only. Do not cut metal, plas- tics, masonry, non-wood building mate- rials, etc.

Stop the saw if the chain strikes a for-S

eign object. Inspect the saw and repair or replace parts as necessary.

S Keep the chain out of dirt and sand. Even a small amount of dirt will quickly dull a chain and thus increase the possi- bility of kickback.

S Practice cutting a few small logs using the following techniques to get the “feel” of using your saw before you be- gin a major sawing operation.

S Squeeze throttle trigger and allow engine to reach full speed before cutting.

S Begin cutting with the saw frame against the log.

S Keep the engine at full speed the entire time you are cutting.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Advertencia Maintain Your SAW in Good Working Order Clothing Gloves Safety Sa fety Chaps ShoesPlan Ahead Operate Your SAW SafelyAvoid Pull---In KickbackReduce the Chance Kickback Avoid Pinch---KickbackMaintain Control Attaching the BAR & Chain If not BAR and Chain Lubrication Adjusting the tensionChecking the tension Fueling EngineChoke Ignition SwitchImportant points to remember Important PointsPlan a clear retreat path Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeBucking Without a Support Bucking Using a LOG or SUP- Port StandCutting a Fallen Tree Types of Cutting Used for BuckingLimbing Removing a Pinched SAWSAW Hung in the LOG Ignition Timing BAR MaintenanceAIR Filter Chain SharpeningNeed Assistance? Need Service Parts?Days Maintenance Placement and Repair of Emission Where To GETWarranty Service Warranty services Service centers

530087857 specifications

The Poulan 530087857 is a standout product in the realm of outdoor power equipment, particularly designed for those who seek reliability and efficiency in their lawn care routine. This model incorporates advanced features and robust technologies that make lawn maintenance a breeze, whether you are a professional landscaper or a dedicated homeowner.

One of the key features of the Poulan 530087857 is its powerful engine, which is engineered to provide high performance and consistent power delivery. The engine is built with a focus on fuel efficiency, allowing users to complete their tasks without frequent refueling interruptions. This not only saves time but also enhances productivity, making it an essential tool for larger lawns and gardens.

The ergonomic design of the Poulan 530087857 ensures comfort during operation. Its lightweight frame and balanced construction reduce fatigue, ensuring that users can maneuver the equipment with ease. The handles are designed for optimal grip, featuring anti-vibration technology that minimizes discomfort during extended use. This allows for longer working sessions without compromising on comfort.

One of the standout technologies integrated into the Poulan 530087857 is its easy-start mechanism. This innovation eliminates the hassle often associated with starting outdoor power equipment, providing users with a hassle-free experience. Combined with a reliable ignition system, this feature ensures that the machine starts promptly every time, saving time and frustration.

The Poulan 530087857 also boasts a user-friendly interface, making it accessible to individuals of all experience levels. Clear controls and indicators allow for easy adjustments, enabling users to customize their cutting experience based on the specific needs of their lawns.

Moreover, this model is designed with durability in mind. Constructed from high-quality materials, the Poulan 530087857 can withstand the rigors of outdoor use. Its components are engineered to resist wear and tear, ensuring longevity and minimizing the need for frequent maintenance.

Finally, the Poulan 530087857 is an environmentally-conscious choice. The engine meets stringent emissions regulations, contributing to a cleaner environment while delivering the performance users expect.

In summary, the Poulan 530087857 combines power, comfort, and advanced technology to create an exceptional outdoor tool that meets the needs of any lawn care enthusiast. Whether you're tackling tough overgrowth or maintaining a manicured lawn, the Poulan 530087857 is engineered to deliver results with ease and efficiency.
Top Page Image Contents