Poulan 530165555 instruction manual Limbing and Pruning Important Points, ING Without a Support

Page 13

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

SWatch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off bal- ance. Use extreme caution when cutting

small size limbs or slender material.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only then can limbing be done safely and prop-

erly.

SLeave the larger limbs underneath the felled

tree to support the tree as you work.

SStart at the base of the felled tree and work toward the top, cutting branches and limbs.

Remove small limbs with one cut.

SKeep the tree between you and the chain. Cut from the side of the tree opposite the branch you are cutting.

S Remove larger, supporting branches with the cutting techniques described in BUCK-

ING WITHOUT A SUPPORT.

SAlways use an overcut to cut small and free- ly hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

PRUNING

WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job.

SMake your first cut 1/3 of the way through the bottom of the limb.

SNext make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch (2.5 to 5 cm) collar from the truck of the tree.

Second cut

Third cut

Collar

First cut

Pruning technique

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 12/8/05 PP3816 AV / PP4218 AV For Occasional Use OnlyPlan Ahead Identification of SymbolsMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackReduce the Chance of Kickback Kickback Safety FeaturesMaintain Control WE do not REP Chain Brake and CKA AngleResent and YOU should not AS Sume That the Chain Brake willAdjusting Screw Tensioning Rack AssemblyAttaching the BAR & Chain If not CuttersChain Tension Adjusting the tensionChecking the tension Operation BAR and Chain Lubrication Before Starting Engine Fueling EngineImportant Points to Remember Cation Always stop the engine before removing the oil capDifficult Starting or starting a flooded engine Starting a Warm EngineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Operating TipsFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Bucking Using a LOG or Support StandImportant Points Types of Cutting Used for BuckingLimbing Limbing and Pruning Important PointsPruning ING Without a SupportService Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Engine Load Adjustment EngineOther Empty fuel tank and refill withElectrolux Home PRODUCTS, INC Tions The U.S. Environmental ProtectionConsequential Damages Electro

530165555 specifications

The Poulan 530165555 is a high-performance chainsaw engineered to tackle a wide range of cutting tasks, from trimming branches to felling large trees. Known for its reliability and ease of use, this model has gained popularity among both DIY enthusiasts and professionals alike.

One of the standout features of the Poulan 530165555 is its powerful engine. It is equipped with a robust two-cycle engine that delivers excellent power output, allowing users to efficiently cut through thick wood with ease. The engine is designed to provide maximum torque, which means that users can expect consistent performance even under demanding conditions.

Durability is another key characteristic of the Poulan 530165555. The chainsaw is constructed with high-quality materials that can withstand the rigors of regular use. Its heavy-duty frame and components ensure longevity and reliability, making it a worthy investment for anyone looking to maintain their property or work in forestry.

The Poulan 530165555 also boasts user-friendly features that enhance the overall experience. The chainsaw is designed with an ergonomic handle that provides a comfortable grip, reducing fatigue during prolonged operation. Additionally, the lightweight design allows for easy maneuverability, making it an ideal choice for overhead cuts and precise trimming.

Safety is a top priority, and the Poulan 530165555 incorporates several safety features to protect users. It includes a chain brake that engages automatically in the event of kickback, ensuring that the operator remains safe while working. Furthermore, the chainsaw features a low kickback bar and chain, contributing to a more predictable cutting action.

Another notable technology is the easy-start mechanism that simplifies ignition, allowing users to start the chainsaw with minimal effort. This feature is especially beneficial for those who may not have extensive chainsaw experience.

Maintenance is an essential aspect of any tool, and the Poulan 530165555 shines in this area as well. The chainsaw comes with a tool-less chain tensioning system, enabling users to adjust the chain quickly and easily without the need for additional tools. This ensures optimal performance and extends the life of the chain.

In conclusion, the Poulan 530165555 is a well-rounded chainsaw that combines power, durability, user-friendly features, and safety technologies. Its ability to handle various cutting tasks makes it an indispensable tool for homeowners and professionals alike. Whether you are pruning trees, cutting firewood, or tackling larger cutting jobs, the Poulan 530165555 stands out as a reliable and efficient solution.
Top Page Image Contents