Poulan 530165555-01 Before Starting Engine Fueling Engine, BAR and Chain Lubrication

Page 9

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel handling information in the safety rules sec- tion of this manual before you begin. If you do not understand the fuel handling information do not attempt to fuel your unit. Seek help from someone that does understand the in- formation or call the customer assistance help line at 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slow- ly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on un- leaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/Weed Eater brand synthetic oil is recommended. A 40:1 ratio is obtained by mixing 3.2 ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gaso- line. Included with this saw is a 3.2 ounce (95 ml) container of Poulan/Weed Eater brand syn- thetic oil. Pour the entire contents of this con- tainer into 1 gallon (4 liters) of gasoline to achieve the proper fuel mixture.

DO NOT USE automotive or marine oil. These oils will cause engine damage. When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules listed under HANDLE FUEL WITH CAUTION.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lubri- cation. Lubrication is provided by the auto- matic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/ or discoloration of the bar.

In freezing weather oil will thicken, making it necessary to thin bar and chain oil with a small amount (5 to 10%) of #1 Diesel Fuel or kerosene. Bar and chain oil must be free flowing for the oil system to pump enough oil for adequate lubrication.

Genuine Poulan or Poulan PROR bar and chain oil is recommended to protect your unit against excessive wear from heat and fric- tion. Poulan or Poulan PROR oil resists high temperature thinning.

If Poulan or Poulan PROR bar and chain oil is not available, use a good grade SAE 30 oil.

SNever use waste oil for bar and chain lubri-

cation.

SAlways stop the engine before removing the oil cap.

IMPORTANT

Experience indicates that alcohol--blended fuels (called gasohol or using ethanol or meth- anol) can attract moisture which leads to sepa-

ration and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine prob- lems, the fuel system should be emptied before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See STORAGE section for addi- tional information.

CHAIN BRAKE

Ensure chain brake is disengaged by pulling the front hand guard back toward the front han- dle as far as possible. The chain brake must be disengaged before cutting with the saw.

WARNING: The chain must not move when the engine runs at idle speed. If the chain moves at idle speed refer to CAR- BURETOR ADJUSTMENT within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns.

To stop the engine move the ON/STOP switch to the STOP position.

To start the engine hold the saw firmly on the ground as illustrated. Make sure the chain is free to turn without contacting any object.

Use only 15″ -- 18″ (40 -- 45 cm) of rope per pull.

Hold saw firmly while pulling starter rope. Starter Rope Handle

Left Hand on Front Handle

Right Foot Through Rear Handle

IMPORTANT POINTS TO REMEMBER

When pulling the starter rope, do not use the full extent of the rope as this can cause the rope to break. Do not let starter rope snap back. Hold the handle and let the rope re- wind slowly.

For cold weather starting, start the unit at FULL CHOKE; allow the engine to warm up before squeezing the throttle trigger.

NOTE: Do not attempt to cut material with the choke/fast idle lever in the FULL CHOKE position.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or warm engine after running out of fuel)

NOTE: In the following steps, when the choke/fast idle lever is pulled out to the full extent, the correct throttle setting for starting is set automatically.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 530165555-01 8/20/04 PP3816 AV / PP4218 AV For Occasional Use OnlyPlan Ahead Identification of SymbolsMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackKickback Safety Features Reduce the Chance of KickbackMaintain Control WE do not REP Chain Brake and CKA AngleResent and YOU should not AS Sume That the Chain Brake willAdjusting Screw Tensioning Rack AssemblyAttaching the BAR & Chain If not CuttersAdjusting the tension Chain TensionChecking the tension Operation BAR and Chain Lubrication Before Starting Engine Fueling EngineImportant Points to Remember Cation Always stop the engine before removing the oil capDifficult Starting or starting a flooded engine Starting a Warm EngineBraking function control Caution The chain brake must be Inertia activating function controlOperating Tips Tension in the Assembly sectionTree Felling Techniques Felling Large TreesCutting a Fallen Tree Bucking Using a LOG or Support StandImportant Points Types of Cutting Used for BuckingLimbing Limbing and Pruning Important PointsPruning ING Without a SupportService Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Other Load Adjustment EngineElectrolux Home PRODUCTS, INC Ligations The U. S. EnvironmentalNANCE, Replacement and Repair of Emission Related Parts Any

530165555-01 specifications

The Poulan 530165555-01 is a robust and versatile chainsaw designed for both professional landscapers and home users seeking reliable performance for various cutting tasks. Renowned for its durability and efficiency, this model combines modern technology with user-friendly features to ensure a seamless cutting experience.

One of the standout characteristics of the Poulan 530165555-01 is its powerful engine. Equipped with a potent 50cc two-stroke engine, it offers a balance of power and lightweight design, making it suitable for prolonged use without causing excessive fatigue. The engine is designed for optimal fuel efficiency, enabling users to accomplish more tasks with less refueling. This is particularly beneficial for those who need to tackle larger jobs or for professional users who rely on their equipment for daily workloads.

The chainsaw features an adjustable automatic oiling system, which ensures that the bar and chain are consistently lubricated. This system helps to enhance the lifespan of the cutting components while also minimizing friction and heat during operation. The 20-inch bar length is ideal for a variety of cutting tasks, from felling trees to trimming branches, offering versatility for different projects.

Safety is a top priority with the Poulan 530165555-01, and it includes several safety features designed to protect the user. The chain brake provides an immediate stop in the event of kickback, while the anti-vibration system reduces operator fatigue, allowing for longer periods of safe operation. Furthermore, the easy-start technology makes it simple for users of all experience levels to start the chainsaw with minimal effort, reducing the frustration often associated with traditional pull-start mechanisms.

Another notable feature is the tool-less chain tensioning system, which allows users to make quick adjustments to the chain tension without the need for additional tools. This innovation enhances convenience and empowers users to maintain optimal cutting performance on the fly.

In summary, the Poulan 530165555-01 is a well-rounded chainsaw that blends power, safety, and ease of use. Whether you're a seasoned professional or a homeowner tackling seasonal yard work, the combination of its durable construction, efficient operation, and user-friendly features makes it a reliable choice for various cutting needs. With this chainsaw in hand, users can confidently take on any task, knowing they have a dependable tool at their disposal.
Top Page Image Contents