Poulan 530087722, 2000-01 Checking the tension, Adjusting the tension, Fueling Engine

Page 6

Adjusting

Screw

 

Mount the Bar

 

Tip of Bar

Bar Clamp Nuts

Guide Bar

Proper chain direction

Place chain onto the sprocket

CHAIN TENSION (Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the bar nuts are finger tight only. Attempting to tension the chain when the bar nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the combination screwdriver/wrench tool to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag be- low the bar.

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust chain tension by loosening the bar clamp nuts and turning the adjust- ing screw 1/4 of a turn while lifting up on bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

If chain is too loose, turn adjustingS

screw 1/4 turn clockwise.

S Lift up the tip of the bar and tighten the bar clamp nuts with the combination screw- driver/wrench.

S Recheck chain tension.

FUELING ENGINE

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality

2-cycle air-cooled engine oil. We recommend Poulan/Weed Eater brand oil. If you do not use this oil, use a good quality 2-cycle air-cooled oil designed to be mixed at a ratio of 40:1 (A 40:1 ratio is obtained by mixing 3.2 onces of oil with 1 gallon of unleaded gasoline). When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules relating to fuel before fueling your unit.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lubri- cation. Lubrication is provided by the auto- matic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/or discoloration of the bar.

In freezing weather oil will thicken, making it necessary to thin bar and chain oil with a small amount (5 to 10%) of #1 Diesel Fuel or kerosene. Bar and chain oil must be free flowing for the oil system to pump enough oil for adequate lubrication.

Genuine POULAN or POULAN PRO bar and chain oil is recommended to protect your unit against excessive wear from heat and friction. POULAN or POULAN PRO oil resists high temperature thinning. If POULAN or POULAN PRO bar and chain oil is not available, use a good grade SAE 30 oil.

SNever use waste oil for bar and chain lu- brication.

Always stop the engine before removingS

the oil cap.

Chain moves freely

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fuel mix cap

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Oil Cap

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lifts only 1/8 of an inch from bar.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 2250 / 2450 Maintain Your SAW in Good Working Order Plan AheadOperate Your SAW Safely Handle Fuel with CautionAvoid Pinch---Kickback KickbackReduce the Chance Kickback Avoid Pull---InMaintain Control Attaching the BAR & Chain If not Fueling Engine Adjusting the tensionChecking the tension BAR and Chain LubricationImportant points to remember Important PointsTree Felling Techniques Cutting a Fallen Tree Felling Large Trees 6 inches in diameter or largerNotch CUT and Felling the Tree Plan a clear retreat pathBucking Using a LOG or SUP- Port Stand Types of Cutting Used for BuckingBucking Without a Support Removing a Pinched SAW LimbingPruning Chain Sharpening BAR MaintenanceAIR Filter Ignition TimingPage Warranty Service Warranty services Related Parts Any POULAN/WEED

2000-01, 530087722 specifications

The Poulan 2000-01, model number 530087722, is a robust and versatile tool tailored for yard care enthusiasts and professionals alike. Renowned for its reliability and efficiency, this model stands out in the world of lightweight chainsaws, appealing to a wide range of users, from homeowners to skilled landscapers.

One of the key features of the Poulan 2000-01 is its powerful engine. Equipped with a 2-cycle gas engine, it delivers a commendable balance of power and performance, making it an excellent choice for cutting through branches, trimming trees, and tackling various wood cutting tasks. The engine's design ensures that it operates smoothly while reducing emissions, which is an important consideration in today’s environmentally conscious world.

A distinguishing characteristic of the Poulan 2000-01 is its lightweight construction. Weighing in at just over 10 pounds, this chainsaw is easy to maneuver, reducing operator fatigue during extended use. The compact design, coupled with an ergonomic handle, enhances user comfort and control, allowing for precise cuts and easy handling.

The saw features an automatic chain oiler, which ensures that the chain receives a consistent supply of lubrication. This feature not only extends the life of the chain and bar but also improves overall cutting performance. The easy-access air filter is another highlight, allowing for quick cleaning and maintenance, which contributes to optimal saw operation.

Safety is paramount when it comes to chainsaws, and the Poulan 2000-01 does not disappoint. It includes a chain brake system that stops the chain immediately in the event of kickback, providing an added layer of safety for users. Furthermore, the saw is equipped with a safety throttle lockout to prevent accidental starts, making it a reliable choice for those new to using power tools.

The Poulan 2000-01, 530087722, is designed with durability in mind. Its construction and materials ensure that it can withstand the rigors of frequent use in varying conditions. Whether you're a casual user or a professional, this tool provides the performance and reliability needed to accomplish any task.

In summary, the Poulan 2000-01 chainsaw is a blend of power, ease of use, and safety features, making it a valuable addition to any toolkit. Its lightweight design, combined with its efficient engine and robust safety mechanisms, positions it as a preferred choice for anyone looking to maintain their yard or tackle larger cutting projects.
Top Page Image Contents