Poulan 545137219 instruction manual Storage

Page 10

CLEAN AIR FILTER

Air Filter

Cover

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Line

Fuel Filter

Air Filter

Screws

CHECK MUFFLER MOUNTING SCREWS

Once each year, ensure muffler mounting screws are secure and tightened properly to prevent damage.

Cleaning the air filter:

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 5 hours of operation or yearly, whichever comes first.

1.Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed, nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

Mounting

Screw

Muffler Cover

Holes

 

Screws

1.Loosen and remove the 2 screws from the muffler cover.

2.Remove the muffler cover.

3.Tighten the 2 muffler mounting screws se- curely.

4.Reinstall muffler cover and 2 screws. Tighten securely.

CARBURETOR ADJUSTMENTS

There is no screw for idle adjustment on your blower. The throttle lever is used to control engine speed. The throttle lever can be placed in one of four positions: STOP, IDLE

or , FULL THROTTLE or

, and one

intermittent position. If your engine will not run properly or you require further assistance, contact an authorized service dealer or call 1--800--554--6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.If your unit is to be stored for a period of time:

SClean the entire unit before lengthy stor- age. S Store in a clean dry area.

SLightly oil external metal surfaces.

-- 10 --

Image 10
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Plan Ahead Safety RulesKnow Your Unit Handle Fuel with CAUTION, IT is Highly FlammableBefore starting engine Operate Your Unit SafelyMaintain Your Unit Properly Store in a dry area out of reach of childrenVacuum BAG Assembly AssemblyBlower Tube Assembly Vacuum Tube AssemblyShoulder Strap Adjustment HOW to Convert Unit from Vacuum USE to Blower USEHook Retaining Post Operation Before Starting the Engine Before Starting Engine Fueling EngineTo Stop the Engine Blower VacuumMaintenance Storage Engine Troubleshooting Table Cause RemedyFuel System OtherLimited Warranty EPA/CALIFORNIA Emission Control Warranty StatementAt all Poulan Service centers Maintenance

545137219 specifications

The Poulan 545137219 is a powerful and versatile chainsaw that caters to both residential and professional users. Known for its reliability and robust performance, this model embodies the ideal combination of power, precision, and user-friendly features.

One of the standout features of the Poulan 545137219 is its 45cc engine, which delivers ample power for various cutting tasks, from felling trees to trimming branches. This two-stroke engine is designed to provide efficient fuel combustion, ensuring you can complete your projects without frequent refueling. The lightweight design of the chainsaw enhances maneuverability, allowing users to work for extended periods without excessive fatigue.

The chainsaw is equipped with a 20-inch guide bar, making it suitable for tackling medium to large-sized jobs. This length strikes a perfect balance between cutting capability and control, allowing users to make precise cuts while maintaining stability. The Oregon chain included with the saw provides sharpness and durability, enhancing overall performance and ensuring clean cuts.

Another notable characteristic is the Quick Adjust feature, which allows for easy tensioning of the chain without the need for additional tools. This innovation ensures that users can quickly address any chain slack during operation, promoting both safety and efficiency. Additionally, the Poulan 545137219 utilizes an automatic oiling system, which provides consistent lubrication to the chain and bar, reducing friction and extending the lifespan of the components.

Safety is a significant consideration in the design of the Poulan 545137219. It features a chain brake that engages automatically when a kickback occurs, protecting the user from potential injury. Furthermore, the ergonomic handle design provides a comfortable grip, reducing hand strain and enhancing control over the chainsaw.

In summary, the Poulan 545137219 chainsaw stands out for its powerful engine, user-friendly features, and safety mechanisms. Its blend of performance and ease of use makes it an excellent choice for both novice and experienced users alike. Whether for routine yard maintenance or more demanding jobs, the Poulan 545137219 is a reliable tool that delivers on its promises, making it a valuable addition to any toolkit.