Poulan 530086596, 2001-08 Reduce the Chance Kickback, Maintain Control, Kickback Safety Features

Page 4

Avoid Obstructions

Elbow locked

Clear The Working Area

REDUCE THE CHANCE OF

KICKBACK

S Recognize that kickback can happen. With a basic understanding of kickback, you can reduce the element of surprise which contributes to accidents.

SNever let the moving chain contact any ob-

ject at the tip of the guide bar.

SKeep the working area free from obstruc- tions such as other trees, branches, rocks, fences, stumps, etc. Eliminate or avoid any obstruction that your saw chain could hit while you are cutting. When cutting a branch, do not let the guide bar contact branch or other objects around it.

SKeep your saw chain sharp and properly tensioned. A loose or dull chain can in- crease the chance of kickback occurring. Follow manufacturer ’s chain sharpening and maintenance instructions. Check ten-

sion at regular intervals with the engine stopped, never with the engine running. Make sure the chain brake nuts are se- curely tightened after tensioning the chain.

SBegin and continue cutting at full speed. If

the chain is moving at a slower speed, there is greater chance of kickback occur- ring.

SCut one log at a time.

S Use extreme caution when re-entering a previous cut.

SDo not attempt cuts starting with the tip of

the bar (plunge cuts).

SWatch for shifting logs or other forces that could close a cut and pinch or fall into

chain.

S Use the Reduced--Kickback Guide Bar and Low--Kickback Chain specified for your saw.

MAINTAIN CONTROL

Stand to the left of the saw

Thumb on underside of handlebar

Never reverse hand positions

Thumb on underside of handlebar

SKeep a good, firm grip on the saw with both hands when the engine is running and don’t let go. A firm grip will help you reduce kickback and maintain control of the saw. Keep the fingers of your left hand encir- cling and your left thumb under the front handlebar. Keep your right hand com- pletely around the rear handle whether your are right handed or left handed. Keep

your left arm straight with the elbow locked.

SPosition your left hand on the front handle- bar so it is in a straight line with your right

hand on the rear handle when making bucking cuts. Never reverse right and left hand positions for any type of cutting.

SStand with your weight evenly balanced on

both feet.

SStand slightly to the left side of the saw to

keep your body from being in a direct line with the cutting chain.

SDo not overreach. You could be drawn or

thrown off balance and lose control of the saw.

SDo not cut above shoulder height. It is diffi- cult to maintain control of saw above shoulder height.

KICKBACK SAFETY FEATURES

WARNING: The following features are included on your saw to help reduce the hazard of kickback; however, such features will not totally eliminate this danger. As a chain saw user, do not rely only on safety de- vices. You must follow all safety precau- tions, instructions, and maintenance in this manual to help avoid kickback and other forces which can result in serious injury.

SReduced--Kickback Guide Bar, designed with a small radius tip which reduces the size of the kickback danger zone on the bar tip. A Reduced--Kickback Guide Bar has been demonstrated to significantly re- duce the number and seriousness of kick- backs when tested in accordance with safety requirements for gasoline powered

chain saws as set by ANSI B175.1.

Reduced Kickback Symmetrical Guide Bar

Small Radius Tip

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Operate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackKickback Safety Features Reduce the Chance KickbackMaintain Control Your left arm straight with the elbow lockedComputed kickback angle CKA Table Chain Brake and CKA AngleFront Hand Guard, designed to reduce Attaching the BAR & Chain If not Cutters Depth Gauge Drive LinksAdjusting the tension Checking the tensionON/STOP Switch Know Your SAWThrottle Trigger Throttle LockoutFueling Engine BAR and Chain LubricationImportant Points to Remember Right foot through rear handleStarting a Warm Engine Difficult Starting or starting a flooded engineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Felling Large TreesNotch CUT and Felling the Tree Plan a clear retreat pathBucking Using a LOG or Support Stand Cutting a Fallen TreeTypes of Cutting Used for Bucking Bucking Without a SupportUsing a support stand Limbing and Pruning Important PointsLimbing PruningCleaning the air filter Cleaning the Spark ARREST- ING ScreenAIR Filter Inspect Muffler and Spark Arresting ScreenCarburetor Adjustments BAR MaintenanceNeed Service PART? Chain SharpeningTroubleshooting Table Cause Remedy Your Warranty Rights and OB Ligations The U.S. Environmental

530086596, 2001-08 specifications

The Poulan 2001-08,530086596 is a robust and versatile addition to the line of outdoor power equipment. Known for its reliability and performance, this tool is particularly favored by both homeowners and landscaping professionals.

One of its standout features includes a powerful engine designed for efficient operation in various tasks. The engine typically provides ample horsepower, making it suitable for cutting through thick underbrush and handling a range of yard maintenance jobs. The reliable ignition system further enhances starting efficiency, allowing users to get to work without the frustration of engine troubles.

The Poulan 2001-08,530086596 also comes with an ergonomic design that emphasizes user comfort. Its lightweight build allows for ease of movement, reducing fatigue during extended use. The handle is designed for a secure grip, which is particularly important for maintaining control while operating the equipment. The overall construction emphasizes both durability and functionality, ensuring that the tool can withstand the rigors of outdoor use.

In terms of technology, this model incorporates advanced features that enhance its usability. The inclusion of automatic oiling systems is a notable advantage, providing consistent lubrication to the cutting mechanisms. This feature minimizes maintenance efforts, allowing users to focus on the task at hand rather than worrying about upkeep.

The cutting capabilities of the Poulan 2001-08,530086596 are particularly impressive. It typically features adjustable cutting heights, allowing users to customize the length of grass or brush they are dealing with. This flexibility is essential for achieving professional-quality results in yard care projects.

Safety has not been overlooked in the design of the Poulan 2001-08,530086596. It is equipped with safety mechanisms that prevent accidental starts and ensure secure operation. Such features are critical in maintaining safe working conditions, especially in environments where users may encounter hazardous debris.

In summary, the Poulan 2001-08,530086596 stands out for its powerful engine, ergonomic design, advanced technology, versatile cutting capabilities, and safety features. Whether you are a homeowner looking to maintain your garden or a professional landscaper handling large projects, this equipment provides the performance and reliability necessary to tackle the challenges of outdoor maintenance effectively.
Top Page Image Contents