Poulan 530086596, 2001-08 Attaching the BAR & Chain If not, Cutters Depth Gauge Drive Links

Page 6

symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: Your saw is equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion engines to be equipped with a spark arresting screen. If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. Refer to the SERVICE section for maintenance of the spark arresting screen.

Failure to follow all Safety Rules and Precau- tions can result in serious injury. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your authorized service dealer or call 1-800--554--6723.

STANDARDS: This saw is listed by Under- writer’s Laboratories, Inc., and the Canadian Standards Association in accordance with:

ANSI B175.1-2000American National Standard for Powered Tools -- Gasoline Powered Chain Saw -- Safety Requirements

CSA Z62.1-1995Chain Saws -- Occupa- tional Health and Safety

CSA Z62.3-1996Chain Saw Kickback Oc- cupational Health and Safety

Protective gloves (not provided) should be worn during assembly.

ATTACHING THE BAR & CHAIN (If not

already attached)

WARNING: If received assembled, repeat all steps to ensure your saw is prop- erly assembled and all fasteners are secure. Always wear gloves when handling the chain. The chain is sharp and can cut you even when it is not moving!

SLoosen and remove the chain brake nuts

and the chain brake from the saw.

S Remove the plastic shipping spacer (if present).

Location of shipping spacer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chain Brake

Chain Brake

Nuts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bar Tool

STurn adjusting screw on bar counterclock- wise to move the tensioning rack as far as it will go toward the front of the bar.

Adjusting

Screw

Tensioning Rack

SSlide the bar behind clutch drum until bar stops against clutch drum sprocket.

Mount the Bar

SPrepare the chain by checking the proper di- rection. Without following the illustration it is easy to place the chain on the saw in the wrong direction. Use the illustration of the chain to determine the proper direction.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

 

 

 

 

 

 

 

 

Drive Links

6

Image 6
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Handle Fuel with Caution Operate Your SAW SafelyMaintain Your SAW in Good Working Order KickbackMaintain Control Kickback Safety FeaturesReduce the Chance Kickback Your left arm straight with the elbow lockedChain Brake and CKA Angle Computed kickback angle CKA TableFront Hand Guard, designed to reduce Attaching the BAR & Chain If not Cutters Depth Gauge Drive LinksAdjusting the tension Checking the tensionThrottle Trigger ON/STOP SwitchKnow Your SAW Throttle LockoutImportant Points to Remember Fueling EngineBAR and Chain Lubrication Right foot through rear handleBraking function control Caution The chain brake must be Starting a Warm EngineDifficult Starting or starting a flooded engine Inertia activating function controlNotch CUT and Felling the Tree Tree Felling TechniquesFelling Large Trees Plan a clear retreat pathTypes of Cutting Used for Bucking Bucking Using a LOG or Support StandCutting a Fallen Tree Bucking Without a SupportLimbing Using a support standLimbing and Pruning Important Points PruningAIR Filter Cleaning the air filterCleaning the Spark ARREST- ING Screen Inspect Muffler and Spark Arresting ScreenNeed Service PART? Carburetor AdjustmentsBAR Maintenance Chain SharpeningTroubleshooting Table Cause Remedy Your Warranty Rights and OB Ligations The U.S. Environmental

530086596, 2001-08 specifications

The Poulan 2001-08,530086596 is a robust and versatile addition to the line of outdoor power equipment. Known for its reliability and performance, this tool is particularly favored by both homeowners and landscaping professionals.

One of its standout features includes a powerful engine designed for efficient operation in various tasks. The engine typically provides ample horsepower, making it suitable for cutting through thick underbrush and handling a range of yard maintenance jobs. The reliable ignition system further enhances starting efficiency, allowing users to get to work without the frustration of engine troubles.

The Poulan 2001-08,530086596 also comes with an ergonomic design that emphasizes user comfort. Its lightweight build allows for ease of movement, reducing fatigue during extended use. The handle is designed for a secure grip, which is particularly important for maintaining control while operating the equipment. The overall construction emphasizes both durability and functionality, ensuring that the tool can withstand the rigors of outdoor use.

In terms of technology, this model incorporates advanced features that enhance its usability. The inclusion of automatic oiling systems is a notable advantage, providing consistent lubrication to the cutting mechanisms. This feature minimizes maintenance efforts, allowing users to focus on the task at hand rather than worrying about upkeep.

The cutting capabilities of the Poulan 2001-08,530086596 are particularly impressive. It typically features adjustable cutting heights, allowing users to customize the length of grass or brush they are dealing with. This flexibility is essential for achieving professional-quality results in yard care projects.

Safety has not been overlooked in the design of the Poulan 2001-08,530086596. It is equipped with safety mechanisms that prevent accidental starts and ensure secure operation. Such features are critical in maintaining safe working conditions, especially in environments where users may encounter hazardous debris.

In summary, the Poulan 2001-08,530086596 stands out for its powerful engine, ergonomic design, advanced technology, versatile cutting capabilities, and safety features. Whether you are a homeowner looking to maintain your garden or a professional landscaper handling large projects, this equipment provides the performance and reliability necessary to tackle the challenges of outdoor maintenance effectively.