Clean AIR Filter, Check Muffler Mounting Screws

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 5 hours of operation or yearly, whichever comes first.

CHECK MUFFLER MOUNTING SCREWS

Once each year, ensure muffler mounting screws are tightened securely to prevent damage.

Air Filter

Cover

Button

Muffler

Mounting

Air Filter

Cleaning the air filter:

1.Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the cover is removed.

NOTE: Move choke lever to RUN position before opening air filter cover.

2.Open air filter cover by pushing button (see illustration). Remove air filter.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed, nonadjustable.

NOTE: This spark ignition system complies with the Canadian standard ICES--002.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Filter

Fuel Line

Screw

MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

NOTE: THE SPARK ARRESTING SCREEN ON THIS UNIT IS NOT SERVICEABLE.

For normal homeowner use, the muffler and spark arresting screen will not require replace- ment. After 50 hours of use, we recommend that your muffler be replaced by your authorized service dealer.

CARBURETOR IDLE SPEED ADJUSTMENT

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is re- leased.

To adjust idle speed:

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed Screw

Air

Filter

Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call

1--

800--

554--

6723.

-- 10 --

115351327, 952711945 specifications

The Poulan 115351327 and 952711945 are two models from Poulan, a leading brand in outdoor power equipment, known for their reliability and innovative designs. These models cater to homeowners and professional users looking for efficient lawn care solutions.

One of the main features of the Poulan 115351327 is its powerful engine. Equipped with a robust two-stroke engine, this model delivers impressive performance while ensuring efficient fuel consumption. The engine is designed to provide high torque and speed, making it suitable for both light and heavy-duty tasks. The machine's lightweight construction enhances maneuverability, allowing users to easily navigate their lawns and gardens.

The 952711945 model is distinguished by its advanced string trimmer technology. It offers a dual-line cutting system, which increases efficiency and reduces the time spent on trimming. The auto-feed head is another notable feature, ensuring that the trimmer line is always positioned correctly for optimal performance. This technology allows for seamless operation without the interruptions of manual line adjustments.

Both models are designed with user comfort in mind. The ergonomic handle design reduces fatigue during extended use, while the adjustable shaft allows users to customize the length for optimal control and comfort. This feature is particularly beneficial for varied user heights, ensuring that everyone can operate the equipment effectively.

Durability is another key characteristic of the Poulan 115351327 and 952711945. The heavy-duty construction materials used in these models are resistant to wear and tear, ensuring longevity and reliable operation. These trimmers also come equipped with a safety guard, protecting users from debris and enhancing overall safety during operation.

Additionally, Poulan incorporates advanced vibration reduction technology in both models, minimizing vibrations transmitted to the user’s hands and arms. This feature significantly enhances user comfort and reduces the risk of long-term injury.

In conclusion, the Poulan 115351327 and 952711945 represent a solid investment for anyone in need of reliable lawn trimming solutions. With their powerful engines, advanced trimmer technologies, user-friendly designs, and robust construction, these models are sure to meet the demands of both homeowners and professionals alike, making lawn care tasks more efficient and enjoyable.