Maintenance

Throttle Position Lever (Cruise Control)

2.Slowly press the primer bulb 6 times.

3.Move the start lever to the START position.

Start

StarterLever

Handle

Primer

Bulb

4.Pull starter rope handle sharply until en- gine starts and runs.

5.Allow unit to run for 10--15 seconds, then ful- ly squeeze the throttle trigger to disengage the starting system.

STARTING A WARM ENGINE

1.Squeeze and hold the throttle trigger.

2.Pull starter rope sharply while squeezing throttle trigger until engine runs.

NOTE: Normally, the warm starting proce- dure can be used within 5--10 minutes after the unit is turned off. If the unit sits for more than 10 minutes without being used, it will be necessary to start the unit by following the steps under STARTING A COLD ENGINE or following the starting instruction steps shown on the unit.

STARTING A FLOODED ENGINE

Flooded engines can be started by moving the start lever to the RUN position and fully squeezing the throttle trigger. Pull the starter handle repeatedly while squeezing throttle trigger until engine starts and runs. This could require pulling the starter handle many times, depending on how badly the unit is flooded. If the unit still doesn’t start, refer to the TROU-

BLESHOOTING TABLE or call 1-800-554-6723.

WARNING: Avoid touching muffler unless engine and muffler are cold. A hot muffler can cause serious burns.

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury. Always disconnect the spark plug before performing maintenance or ac- cessing movable parts.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

CHECK FOR LOOSE

FASTENERS AND PARTS

SMuffler

SSpark Plug Boot S Air Filter

S Housing Screws

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S Fuel Tank -- Do not use unit if fuel tank shows signs of damage or leaks.

S Vacuum Bag -- Do not use vacuum bag if it is torn or damaged.

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

S Wipe off unit with a clean dry cloth.

-- 9 --

115351327, 952711945 specifications

The Poulan 115351327 and 952711945 are two models from Poulan, a leading brand in outdoor power equipment, known for their reliability and innovative designs. These models cater to homeowners and professional users looking for efficient lawn care solutions.

One of the main features of the Poulan 115351327 is its powerful engine. Equipped with a robust two-stroke engine, this model delivers impressive performance while ensuring efficient fuel consumption. The engine is designed to provide high torque and speed, making it suitable for both light and heavy-duty tasks. The machine's lightweight construction enhances maneuverability, allowing users to easily navigate their lawns and gardens.

The 952711945 model is distinguished by its advanced string trimmer technology. It offers a dual-line cutting system, which increases efficiency and reduces the time spent on trimming. The auto-feed head is another notable feature, ensuring that the trimmer line is always positioned correctly for optimal performance. This technology allows for seamless operation without the interruptions of manual line adjustments.

Both models are designed with user comfort in mind. The ergonomic handle design reduces fatigue during extended use, while the adjustable shaft allows users to customize the length for optimal control and comfort. This feature is particularly beneficial for varied user heights, ensuring that everyone can operate the equipment effectively.

Durability is another key characteristic of the Poulan 115351327 and 952711945. The heavy-duty construction materials used in these models are resistant to wear and tear, ensuring longevity and reliable operation. These trimmers also come equipped with a safety guard, protecting users from debris and enhancing overall safety during operation.

Additionally, Poulan incorporates advanced vibration reduction technology in both models, minimizing vibrations transmitted to the user’s hands and arms. This feature significantly enhances user comfort and reduces the risk of long-term injury.

In conclusion, the Poulan 115351327 and 952711945 represent a solid investment for anyone in need of reliable lawn trimming solutions. With their powerful engines, advanced trimmer technologies, user-friendly designs, and robust construction, these models are sure to meet the demands of both homeowners and professionals alike, making lawn care tasks more efficient and enjoyable.