Poulan 2001-03 operating instructions Adjusting the tension

Page 6

SPlace the chain onto the sprocket located behind the clutch drum (see illustration). Fit the chain between the teeth in the

sprocket.

SStart at the top of the bar and fit chain into

groove around the guide bar.

SPull the bar forward until the chain is snug

in the groove of the bar.

SHold guide bar against the saw frame and install the chain brake. Make sure the ad- justing pin is aligned with the hole in the bar. Remember this pin moves the bar for-

ward and backward as the screw is turned.

SReplace the chain brake nuts and tighten finger tight. Once the chain is tensioned you will need to tighten chain brake nuts.

Mount the Bar

Tip of Bar

Proper chain direction

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the chain brake nuts and turning the ad- justing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

Adjusting

Screw

Chain Brake Nuts

Guide Bar

Adjusting Screw -- 1/4 Turn

Place chain onto the sprocket

CHAIN TENSION (Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag below the bar.

6

S Lift up the tip of the bar and tighten the chain brake nuts with the bar tool.

SRecheck chain tension.

Chain Brake

Nuts

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 2250 / 2450 / 2550 LE Series For Occasional Use Only Maintain Your SAW in Good Working Order Plan AheadOperate Your SAW Safely Handle Fuel with CautionMaintain Control KickbackReduce the Chance Kickback Ward the operatorKickback Safety Features Chain BrakeSafety Notice Exposure to Back toward the operatorAdjusting the tension Throttle Trigger ON/STOP SwitchKnow Your SAW Throttle LockoutBAR and Chain Lubrication Switch Primer BulbFueling Engine Important Points to RememberStarting a Warm Engine Important PointsBack Notch CUT and Felling the Tree Tree Felling TechniquesFelling Large Trees Plan a clear retreat pathTypes of Cutting Used for Bucking Bucking Using a LOG or Support StandCutting a Fallen Tree Bucking Without a SupportLimbing Using a support standLimbing and Pruning Important Points PruningAIR Filter Cleaning the Spark ARREST- ING ScreenCarburetor Adjustments Inspect Muffler and Spark Arresting ScreenIgnition Timing BAR MaintenanceChain Sharpening Spark PlugTroubleshooting Table Cause Remedy Placement and Repair of Emission

2001-03 specifications

The Poulan 2001-03 model is a significant entry in the line of outdoor power equipment, particularly known for its robust design and advanced features that cater to both homeowners and landscaping professionals. This model is primarily recognized for its versatility in handling a variety of tasks such as trimming, pruning, and cutting, making it an excellent choice for those with diverse lawn care needs.

One of the standout features of the Poulan 2001-03 is its powerful engine. Equipped with a reliable two-cycle engine, this model offers efficient performance that ensures effective cutting speed and power. This engine design not only provides substantial power but also contributes to a lightweight construction, allowing for greater maneuverability and ease of use during extended periods of operation.

The Poulan 2001-03 is characterized by its ergonomic handle design, which is aimed at enhancing user comfort and control. The handle is adjustable, helping users of different heights to find an optimal working position. Additionally, the inclusion of anti-vibration technology helps reduce fatigue during use, making it suitable for longer tasks without compromising comfort.

Another key characteristic of this model is its innovative cutting system. The Poulan 2001-03 features a dual-line trimmer head, which allows for more efficient cutting of grass and weeds. The ability to easily reload the trimmer line and adjust the cutting width adds to the convenience, making it user-friendly for both novice and experienced operators.

Durability is also a notable aspect of the Poulan 2001-03. Built with high-quality materials, this model can withstand the rigors of frequent use. It also boasts a fuel-efficient design, helping users save on operational costs while minimizing emissions – a testament to the company’s commitment to environmental sustainability.

In conclusion, the Poulan 2001-03 model stands out due to its powerful engine, ergonomic design, innovative cutting system, and durability. These features collectively make it an efficient and reliable choice for anyone looking to maintain their outdoor spaces effectively. Whether for residential use or in a professional landscaping capacity, the Poulan 2001-03 is equipped to handle a variety of tasks with ease and efficiency.
Top Page Image Contents