Poulan PP5500P, 115261226, 952711672 instruction manual Chain Replacement, To Replace Chain

Page 12

File Holder

File

4. Check and lower depth gauges.

Depth Gauge Tool

File

Cutter

90˚

Depth Gauge

Depth Gauge

SAlign the 30˚ file holder marks parallel with the bar and to the center of the chain.

Cutter

30˚

Cutter

File Holder Line

 

SSharpen cutters on one side of the chain first. File from the inside of each cutter to the outside. Then, turn the chain saw around and repeat the process for the other side of the chain.

SFile on the forward stroke only. Use 2 or 3 strokes per cutting edge.

SKeep all cutters the same length when filing.

SFile enough to remove any damage to cutting edges (side plate and top plate of cutter).

All Cutters

Remove Damage

Same Length

 

 

Top Plate

 

Side Plate

SFile chain to meet the specifications as shown.

75˚60˚

30˚

Hook Angle

 

0.025 inch

 

(0.65 mm)

 

Rounded

Right

Corner

 

Too Much Hook Angle

Squared Off

 

Corner

SPlace gauge tool on cutter.

SIf the depth gauge is higher than the depth gauge tool, file it level to the top of the depth gauge tool.

SMaintain rounded front corner of depth gauge with a flat file.

NOTE: The very top of the depth

gauge should be flat with the front half rounded off with a flat file.

If you require further assistance or are unsure about performing this procedure, contact your authorized service dealer or call our customer assistance help line at 1--800--554--6723.

CHAIN REPLACEMENT

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

It is normal for a new chain to stretch during the first 15 minutes of operation. You should re- check your chain tension frequently and adjust the chain tension as required. See CHAIN TEN- SION section.

Replace the old chain when it becomes worn or damaged. Use only the Low-Kickback replace- ment chain specified in the repair parts list.

TO REPLACE CHAIN:

1.Move ON/STOP switch to the STOP posi- tion and disconnect spark plug (or discon- nect unit from power source).

2.Remove bar clamp nut.

3.Remove bar clamp.

4.Turn adjusting screw by hand counter- clockwise until adjusting pin just touches the stop.

5.Slide guide bar behind sprocket until guide bar stops against sprocket.

6.Remove the old chain.

7.Carefully remove new chain from pack- age. Hold chain with the drive links as shown.

Cutter

Tip of

Bar

Drivelink

CUTTERS MUST FACE IN

DIRECTION OF ROTATION

Wrong

WARNING: Maintain the proper hook angle according to the manufacturer’s specifica- tions for the chain you are using. Improper hook angle will increase the chance of kickback which can result in serious injury.

Cutters

Depth Gauge

 

Drive Links

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Safety Rules Plan AheadMix and pour fuel outdoors UNIT/MAINTENANCE Safety Operate Your Pruner SafelyKickback Safety Features KickbackReduce the Chance Kickback Maintain ControlAssembly Installing Pruner ATTACH- MentTransporting and Storage Tools RequiredShoulder Strap Assembly Adjusting the Assist HandleOperation Installing Attachment Hanger BAR and Chain LubricationOperating Position Pruning Important PointsMaintenance Inspect and Clean Unit and DecalsCheck for Damaged or Worn Parts Check for Loose Fasteners and PartsService and Adjustments Chain Replacement To Replace ChainChain Adjustment User Replaceable Service PartsSeasonal Storage Limited Warranty Statesville RoadCanada, contact

115261226, 952711672, PP5500P specifications

The Poulan PP5500P is a powerful and versatile chainsaw designed for both professional and residential applications. This chainsaw is well-suited for cutting firewood, clearing trails, and performing various outdoor tasks. Its robust 50cc engine delivers reliable performance, ensuring that users can tackle substantial cutting jobs with ease.

One of the standout features of the PP5500P is its Easy Start technology, which simplifies the starting process significantly. This feature reduces the amount of effort needed to start the chainsaw, enabling users to get to work quickly without the frustration of traditional starting methods. It is particularly beneficial for those who might struggle with pull-start mechanisms.

The chainsaw comes equipped with a 20-inch bar and chain, providing an excellent cutting capacity for larger logs and branches. The long reach allows for efficient cutting without the need to reposition the saw frequently. This is ideal for tasks ranging from felling small trees to limbing and bucking.

Safety is another key consideration in the design of the Poulan PP5500P. It includes an automatic chain oiler that ensures the chain remains lubricated during use, reducing wear and tear and prolonging the life of both the chain and bar. Additionally, the chainsaw features a chain brake that activates in case of kickback, providing an added layer of safety for the user.

Ergonomics play a critical role in the overall experience of using the PP5500P. The chainsaw is designed with a comfortable handle that reduces user fatigue, even during extended periods of operation. The lightweight design, paired with balanced weight distribution, enhances maneuverability and control.

One of the notable characteristics of this chainsaw is its durability. Constructed with quality materials, the Poulan PP5500P is built to withstand the rigors of outdoor use. Its robust build ensures that the equipment remains functional even after long-term use, making it a reliable choice for users.

Overall, the Poulan PP5500P combines power, efficiency, and safety in a practical package, making it an ideal choice for anyone looking to handle serious cutting tasks. Its advanced features and user-friendly design make it a valuable addition to any toolkit, whether for professional landscapers or homeowners engaged in DIY projects.
Top Page Image Contents