EN
CLOCK
The clock automatically synchronizes the current time and date when it is brought within range of the radio signal DCF77 generated from Frankfurt, Germany for Central Europe (model BAR626) or MSF60 generated from Rugby, England (model BAR626U).
NOTE The signals are collected by the main unit when it is within 1500 km (932 miles) of a signal.
Initial reception takes
STRONG SIGNAL | WEAK SIGNAL | NO SIGNAL |
|
|
|
|
|
|
To force a manual search for clock signals, press and
hold 
for 2 seconds. If no signal is found, check the batteries.
TURN CLOCK ON / OFF
Perform this step if you cannot receive clock signals.
Press and hold 
for 2 seconds. Then, manually set the clock following the "Set Clock" instructions (below).
The signal icon indicates that the clock feature is ON. No icon means that it is OFF.
SET CLOCK / CALENDAR
You only need to do this if you have disabled the clock feature (for example, if you are too far from or cannot receive a signal).
1.Press and hold MODE for 2 seconds. The Clock Area will blink.
2.Select the hour, minute, year, month, day, and day
of the week language. Press | or | to change |
the setting. |
|
|
3. Press MODE to confirm. |
|
|
The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds and Clock with Weekday display.
ALARMS
This product is equipped with a
VIEW ALARM SETTINGS
Press 
. The alarm time and alarm status will show in the Clock Area.
SET ALARM
1.Press 
to switch to alarm display.
2.Press and hold
again for 2 seconds. The alarm settings will blink.
3.Select the hour and minute. Press 
or 
to
change settings. Press 
to confirm.
ACTIVATE ALARM
Press 
to activate or deactivate the alarm. 
shows in the Clock / Alarm Area when the alarm is activated.
SILENCE ALARM
When the alarm time is reached, the crescendo alarm will sound for 2 minutes. To silence the alarm:
¥Press SNOOZE to silence it for 8 minutes.
OR
¥Press any key except SNOOZE to mute the alarm and activate it again after 24 hours.
If no button is pressed, the alarm will automatically silence after 2 minutes. It will then sound again after 8 minutes.
6