Oregon Scientific WMS802 user manual MSN Direct Reception, Alarm

MSN DIRECT RECEPTION

This product is designed to synchronize its weather, time, and date automatically when it receives the MSN Direct signal.

Reception signal status:

Connected to network.	Not connected to network.
Time, date, and weather are	Time, date, and weather are not
synchronized	synchronized

For best reception, the clock and antenna should be placed on a flat, non-metallic surface near a window. The antenna should be placed away from electrical appliances and not be moved around when searching for a signal. Please wait at least 15 minutes for the device to acquire the signal before moving the antenna or trying the unit in another location.

To enable / disable the clock radio reception (clock synchronization):

Press and hold / .

The only appears when the MSN Direct reception is enabled.

EN CLOCK / CALENDAR

Press MODE to toggle between the following displays:

•Clock and calendar

•Sunrise time and calendar

•Sunset time and calendar

To change the clock:

(You only need to set the clock and calendar if you have disabled the clock reception.)

1.Press and hold MODE to enter clock setting.

2.Use or to change the setting. Press and hold to speed through values.

3.Press MODE to confirm.

4.The setting sequence is time zone offset, hour, minute, year, month and day.

NOTE If you enter +1 in the time zone setting, this will give you your regional time plus 1 hour.

ALARM

To set alarm 1 or 2:

1.Press ALARM to select alarm 1 or 2.

2.Press and hold ALARM to enter alarm setting.

3.Use or to change the setting. (Press and hold to speed through values.)

4.Press ALARM to confirm.

5.The setting sequence is hour and minute

7

WMS802_EN_R4.indd 9

2006.12.5 6:56:41 PM