Oregon Scientific WMR200A RADIO-CONTROLLED / Atomic Clock, Remote Wind Sensor Unit, FCC Statement

Page 11

Memory

Current, Min and Max

Alarm

Hi / Lo

RADIO-CONTROLLED / ATOMIC CLOCK

Synchronization

Auto or disabled

Clock display

HH:MM:SS

Hour format

12hr AM/PM or 24hr

Calendar

DD/MM or MM/DD

Weekday in 5 languages

(E, G, F, I, S)

Battery

4 x UM-3 (AA) 1.5V batteries

 

AC adapter 6V

REMOTE WIND SENSOR UNIT

Dimensions (L x W x H)

178 x 76 x 214 mm (7 x 3 x 8.4 inches)

Weight

100 g (3.53 oz) without battery

Wind speed unit

m/s, kph, mph, knots

Speed accuracy

2 m/s ~ 10 m/s (+/- 3 m/s)

 

10 m/s ~ 56 m/s (+/- 10%)

Direction accuracy

16 positions

Transmission of

Approx. every 14 seconds

wind speed signal

 

Memory

Max speed gust

Battery

2 x UM-3 (AA) 1.5V batteries

OUTDOOR TEMPERATURE / HUMIDITY UNIT

RELATIVE TEMPERATURE

Dimensions

115 x 87 x 118 mm

(L x W x H)

(4.5 x 3.4 x 4.6 inches)

Weight

130 g (4.59 oz) without battery

Temp. unit

°C / °F

Displayed range

-50°C to 70°C (-58°F to 158°F)

Operating range

-30°C to 60°C (-4°F to 140°F)

Accuracy

-20°C – 0°C: +/- 2°C (+/- 4.0°F)

 

0°C - 40°C: +/- 1°C (+/- 2.0°F)

 

40°C - 50°C: +/- 2°C (+/- 4.0°F)

 

50°C - 60°C: +/- 3°C (+/- 6.0°F)

Comfort

20°C to 25°C (68°F to 77°F)

Memory

Current, Min and Max temp.

 

Dew Point w/ Max and Min

 

Wind chill temp. and min

RELATIVE HUMIDITY

Displayed range

2% to 98%

Operating range

25% to 90%

Resolution

1%

Accuracy

25% - 40%: +/- 7%

 

40% - 80%: +/- 5%

 

80% - 90%: +/- 7%

Comfort

40% to 70%

Memory

Current, Min and Max

Battery

2 x UM-4 (AAA) 1.5V batteries

RF TRANSMISSION

RF frequency

433MHz

Range

Up to 100 meters (328 feet) with

 

no obstructions

Transmission

Approx. every 60 seconds

No. of Channel

1 for Wind/ Rain/ UV and 10 for

 

Temp. / Humidity

REMOTE RAIN GAUGE

Dimensions

114 x 114 x 145 mm

(L x W x H)

(4.5 x 4.5 x 5.7 inches)

Weight

241g (8.50 oz) without battery

Rainfall unit

mm/hr and in/hr

Range

0 mm/hr – 9999 mm/hr

Resolution

1 mm/hr

Accuracy

< 15 mm/hr: +/- 1 mm

 

15 mm to 9999 mm: +/- 7%

Memory

Past 24hrs, hourly and accumulated

 

from last memory reset

Battery

2 x UM-3 (AA) 1.5V

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you’re in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support.asp

For international inquiries, please visit: www2.oregonscientific.com/about/ international.asp

EN

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientific, declares that this Professional Weather Center (Models: WMR200 / WMR200A) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.

COUNTRIES RTTE APPROVAL COMPLIED

All EU countries, Switzerland

CH

and Norway

N

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for support or sales. Please visit our website at www2.oregonscientific.com/service for all enquiries.

We

 

Name:

Oregon Scientific, Inc.

Address:

19861 SW 95th Ave.,Tualatin,

 

Oregon 97062 USA

Telephone No.:

1-800-853-8883

declare that the product

 

Product No.:

WMR200 / WMR200A

Product Name:

Professional Weather Center

Manufacturer:

IDT Technology Limited

Address:

Block C, 9/F, Kaiser Estate,

 

Phase 1,41 Man Yue St.,

 

Hung Hom, Kowloon,

 

Hong Kong

is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.

11

Image 11
Contents Introduction ContentsPackaging Contents Base Station Wind Sensor / Temperature & Humidity SensorLCD Display Assembly PartsAccessories Sensors Back ViewOutdoor Temperature / Humidity Clock / Moon PhaseIndoor Temperature and Humidity BAR ChartSET UP Remote Temperature / Humidity Sensor Wind Sensor Getting Started SET UP Remote Wind SensorOutdoor Temperature / Humidity Sensor To mount the wind sensor Remote Unit AssemblyTo mount the temperature / humidity sensor Solar panel facing If you resideTo ensure a level plane Alternative SET UP Remote Wind Sensor on Existing PoleSET UP Rain Gauge To set up the Rain GaugeClock Clock Reception Getting Started SET UP Base StationInsert Batteries Sensor Data TransmissionPressure Temperature and HumidityTemperature and Humidity Trends Moon PhaseMemory MAX / MIN Records AlarmSET UP Software First Time USE Install SoftwareSoftware Updates Disable Sleep ModeTo Disable Sleep Mode on Computer Windows XP To Disable Sleep Mode on Computer Windows VistaRF Transmission Outdoor Temperature / Humidity UnitRADIO-CONTROLLED / Atomic Clock Remote Wind Sensor Unit
Related manuals
Manual 11 pages 39.46 Kb

WMR200A specifications

The Oregon Scientific WMR200A is an advanced weather station designed for both amateur meteorologists and weather enthusiasts. It combines state-of-the-art technology with user-friendly features to deliver accurate and real-time atmospheric data.

One of the standout characteristics of the WMR200A is its ability to measure various weather parameters, including temperature, humidity, barometric pressure, wind speed, wind direction, and rainfall. This comprehensive set of features allows users to monitor the weather conditions in their locality effectively.

The WMR200A is equipped with a wireless sensor suite that includes an indoor console and outdoor sensors. The wireless transmission provides real-time data updates, ensuring that users can access the latest weather information without the hassles of running cables. The outdoor sensor offers a robust design, built to withstand various weather elements, ensuring longevity and reliability.

A notable technology integrated into the WMR200A is its barometric pressure sensor. This allows users to not only track current temperature and humidity but also to obtain crucial atmospheric pressure readings. These readings can be essential for predicting weather patterns, such as incoming storms or changes in weather.

Another impressive feature of the WMR200A is its memory capacity, which allows for the storage of historical data. Users can view weather trends over time, enabling them to analyze patterns and make informed decisions based on past weather behavior. The console displays information graphically, making it easy for users to interpret data at a glance.

The setup process for the WMR200A is straightforward, making it accessible even for individuals who are not particularly tech-savvy. The device includes an easy-to-read LCD display, offering clear visibility of all critical parameters, even in low-light conditions. Additionally, the console can be customized to display preferred readings, ensuring that users can monitor the metrics most important to them.

With its solar-powered sensor option, the WMR200A stands out in sustainability, making it an environmentally friendly choice. Users can place the outdoor sensor in any suitable location without worrying about battery replacement.

In summary, the Oregon Scientific WMR200A offers a comprehensive set of features, advanced technologies, and user-friendly characteristics designed to meet the needs of weather hobbyists and professionals alike. Its wireless capabilities, accurate sensors, and display options make it a top choice for those looking to take control of their local weather monitoring.