Oregon Scientific WMR200A Pressure, SET Altitude, Accumulated Rainfall, Weather Forecast, Wind

EN To select clock display mode:

Press clock area repeatedly to toggle between:

•Clock with seconds

•Clock with weekday

•Date with year

•Data logger (please refer to Memory / Data logger section)

PRESSURE

To toggle barometer unit:

1.Press barometer area to toggle between Altitude / current barometer.

2.Press UNIT to select FEET / M or inHg / mmHg / mb / hPA.

SET ALTITUDE

Set the altitude to reflect distance from sea level at your position.

1. Press barometer area to display ALT.

2.Press SET.

3.Press UP / DWN to set the altitude in 10 m (33 ft) increments from -100 m (-328 ft) to 2500 m (8202 ft).

4.Press SET or touch panel area (except tool bar / forecast area) to confirm.

RAINFALL

To select rainfall display mode:

Press rain area to toggle between:

•Rain rate

•Hourly Rainfall

•Accumulated rainfall

•Rainfall recorded in the past 24 hours

Press UNIT to select mm / in.

ACCUMULATED RAINFALL

To display SINCE DATE:

1.Press rain area repeatedly until Accumulated Rainfall is displayed. (Clock

area will display the start date / time of rainfall recording).

To reset SINCE DATE:

Press and hold MEM to set current time as start of accumulated rainfall records.

UV

The UV index levels are as follows:

UV INDEX	DANGER LEVEL	ICON
0-2	Low
3-5	Moderate
6-7	High
8-10	Very high
11 and above	Extremely high

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius (US- with a 75% accuracy).

Sunny

Clear night

Partly cloudy

Partly cloudy at night

Cloudy

Rainy

Snowy

TEMPERATURE AND HUMIDITY

To toggle temperature unit:

1. Press Indoor / Outdoor Temperature / Humidity area.

2. Press UNIT to select °C / °F.

To auto-scan between sensors (Outdoor):

1.Press Outdoor Temperature / Humidity area.

2.Press and hold CH to display data for each sensor.

AUTO SCANNING FUNCTION

To activate the outdoor temperature and humidity auto-scan function:

1.Press and hold CH to activate auto-scan. The temperature and humidity display will scroll from indoor to ch1 through to ch10.

2.Press CH / MEM to stop the auto-scan.

NOTE Channel 1 is used for the outdoor temperature and humidity sensor provided in this package. Additional temperature and humidity sensors can use other channels.

To change channel:

Press CH to change channel.

TEMPERATURE AND HUMIDITY TRENDS

The temperature and humidity trend icons are based on recent sensor readings.

The trend lines are shown next to the temperature and humidity readings. The trend is shown as follows:

RISING STEADY FALLING

HEAT INDEX

Press Indoor / Outdoor Temperature / Humidity area to display the actual temperature felt:

TEMPERATURE	WARNING	MEANING
RANGE
27°C to 32°C	Caution	Possibility of heat exhaustion
(80°F to 89°F)
32°C to 40°C	Extreme Caution	Possibility of heat dehydration
(90°F to 104°F)
41°C to 54°C	Danger	Heat exhaustion likely
(105°F to 129°F)
54°C to 92°C	Extreme danger	Strong risk of dehydration / sun
(130°F to 151°F)		stroke

NOTE Heat index is only calculated when temperature is 80° F / 27°C or above.

WIND

To select wind display mode:

Press wind area to toggle between:

•Gust

•Average

Press UNIT to select unit: knots / kph / mph / m/s.

The wind level is shown by a series of icons:

Lost	Light	Moderate	Strong	Storm
sensor
	0-8 mph	9-25 mph	26-54 mph	>55 mph
	(3-13 km/h)	(14-41 km/h)	(42-87 km/h)	(>88 km/h)

MOON PHASE

1.Press clock area to activate.

2.Press SET repeatedly to display Year / Calendar date.

3.Press UP / DWN to view moon phase for specific dates.

New Moon	Full Moon
Waxing Crescent	Waning Gibbous
First quarter	Last quarter

8