Omega Engineering OM8800D, OM8828, OM8829 Edit Cell, FAQ How can I restore the original text ?

FAQ: Why won't data table be updated when removing the cursor ?

Ans: It is when you remove the cursor between the ranges ( 200 sample from

cursor 1).For example : If you set number 50 record as cursor 1, the table data shows from 50 249 , now you remove cursor 1 within the range, the data won't be updated, unless remove the curser 1 outside the range, i.e less than 50 or more than 249 .

123	6-29-2001 8:28:20	9.3	29.7
124	6-29-20018:28:21	9.3	29.7
125	6-29-2001 8:28:22	9.3	29.7
126	6-29-2001 8:28:23	9.3	29.7
	8:28:24	9.3	29.7
150	6-29-2001	9.3	29.8
151	6-29-2001 8:28:52	9.3	29.8
152	6-29-2001 8:28:53	9.3	29.8
153	6-29-2001 8:28:54	9.3	29.8
154	6-29-2001 8:28:55	9.3	29.8
155	6-29-2001 8:28:58	9.3	29.8
156	6-29-2001 8:28:56	9.3	29.7
157	6-29-2001 8:28:57	9.3	29.7

(Example)

EXIT

Diagram H:

Edit Cell

You switch from selection to edit state by double-Clicking on the cell. If the active cell (in other words, the currently selected cell) can be edited, pressing <F2> also enables the edit state.(Dia. H) edit from the blue background column.

FAQ: How can I restore the original text ?

Ans: You have to retrieve the file again to restore to the original text .

21