RuggedCom RMC40 manual Panel Mounting

Page 8

2.2 Panel Mounting

With the use of an optional panel-mount adapter, the RuggeMCTM series of media converters can be panel mounted. The drawing shown in Figure 2.2.1 shows an example of an RMC unit panel mounted using the optional panel mount adapter.

The panel mount adapter can be secured to a panel with three screws. The RuggedMCTM product is easily mounted onto the panel mount adapter via the two metal clips on either side of the unit, and a single screw located on the bottom.

Figure 2.2.1: RuggedMC panel mounted using optional panel mount mounting adapter.

8

 2006 RuggedCom Inc. All rights reserved

Rev101

Image 8

Contents RuggedMC  RMC40 Trademarks Table of Contents Functional Overview Feature HighlightsProduct Overview RuggedMCTM Front Panel Description Solid Yellow 100Mbps OperationRuggedMCTM Side and Bottom View 1 RuggedMCTM Side and Bottom ViewInstallation DIN Rail MountingPanel Mounting Power Supply Wiring and Grounding RJ45 Ports Signal Description 1 RJ45 Port PinsPower Supply Specifications Twisted-Pair Port SpecificationsParameter 10FL 100FX Module Fiber Optical Port SpecificationsNetworking Standards Supported Operational Specifications 2048Mechanical Specifications Type Test Specifications Electrical Safety Levels CommentsIEC 95%Warranty Operating EnvironmentAgency Approvals Parameter Range Comments