Installation Warnings and Tips

THANK YOU for purchasing Infinity’s Reference Series automotive loudspeaker components. We’ve organized this manual to make your installation as simple and trouble-free as possible. Please read it thoroughly before proceeding.

Remember to keep your sales receipt with this manual in a safe place so both are available for future reference.

• Always wear protective eyewear when using

any tools.

• Turn off all audio systems and other electrical

devices before you start. Disconnect the (–)

negative lead from your vehicle’s battery.

• Keep speakers in their package until final

installation. When moving a speaker, always

rest it with the cone or dome facing up. Never

use force to install any speaker.

• Check clearances on both sides of a planned

INSTALLATION

Figure 1. Mounting the 5010cs woofer with	Figure 3. Mounting the 6010cs in 165mm speaker
the grille.	locations.

IMPORTANT: Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical procedures. Although these instructions explain how to install Reference Series speakers in a general sense, they do not show the exact installation methods for your particular vehicle. If you do not feel you have the experience, do not attempt the installation yourself; instead, ask your authorized Infinity car audio dealer about professional installation options.

WARNING: Playing loud music in an automobile can permanently damage your hearing, as well as hinder your ability to hear traffic.The maximum volume levels achievable with Infinity speakers, combined with high power amplification, may exceed safe levels for extended listening. We recommend using low volume levels when driving. Infinity accepts no liability for hearing loss, bodily injury, or property damage as a result of use or misuse of this product.

mounting surface before drilling any holes or

installing any screws. Remember that the

screws can extend behind the surface.

• At the installation sites, locate and make a note

of all fuel lines, hydraulic brake lines, vacuum

lines, and electrical wiring. Use extreme caution

when cutting or drilling in and around these

areas.

CAUTION: In some cars, fuel tanks may be located directly beneath the rear deck. Check for adequate speaker basket clearance before considering this location!

•Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl, to keep material from snagging in a drill bit or saw.

•For door installations, check the clearance with the windows throughout the range of the window’s travel, and verify that a mounted speaker will not interfere with the window crank or power window mechanism.

•If mounting speakers elsewhere, check for clearance around rear deck torsion bars, glove box, or other structural elements.

•Do not mount speakers where they will get wet.

Figure 2. Mounting the 6010cs woofer with the grille.

Note:The 6810cs is designed to replace 5" x 7" and 6" x 8" speakers installed behind existing vehicle grilles, and does not include grilles.

FOAM GASKET

MOUNTING RING

INTERMOUNT III (PATENT NO. 6,505,705)

The 6010cs is packaged with two different speaker adaptor rings.These are used to install the 6-1/2" speakers in various vehicles.The metal ring can be mounted in many European vehicles, while the plastic ring can be mounted in many vehicles using 6-3/4" speaker locations or three-point mounting frames.

Figure 4. Mounting the 6010cs woofer in standard speaker locations.

FOAM GASKET

6010cs, 6810cs, 5010cs, Automotive Loudspeaker Components specifications

The Infinity 5010cs, 6810cs, and 6010cs automotive loudspeaker components represent a premium range of car audio solutions designed to elevate the listening experience within vehicles. Each model is crafted with advanced technologies and distinctive characteristics that set them apart in the automotive audio landscape.

Starting with the Infinity 5010cs, this component system emphasizes high-performance sound reproduction. It features a pair of 5.25-inch woofers that deliver deep and powerful bass, complemented by 0.75-inch silk dome tweeters designed for smooth and accurate high-frequency response. The speakers utilize a patented Basket design, which ensures optimal sound dispersion. Additionally, the inclusion of high-quality crossover networks helps maintain clarity and detail across the audio spectrum, making it an excellent choice for audiophiles seeking a rich, full-bodied sound.

The Infinity 6810cs offers enhanced power handling and a broader frequency range. It incorporates larger 6.5-inch woofers that enhance low-end performance, while the 1-inch tweeters deliver bright, detailed highs. One of the standout features of the 6810cs is its advanced materials, including a polypropylene cone and rubber surround, which provide durability and improved sound quality over time. Users will appreciate the dynamic sound stage that the speaker system creates, ensuring that every note is heard with precision.

On the other hand, the Infinity 6010cs serves as an excellent option for those looking for a compact yet powerful speaker solution. With a 6.5-inch woofer and a 0.75-inch tweeter, this model maintains a compact design without sacrificing performance. It features a unique Plus One+ cone design, which offers more cone area than traditional speaker designs, resulting in greater bass output and system efficiency. The 6010cs is also equipped with woven glass fiber cones, promoting rigidity while minimizing distortion at high volumes.

All three models incorporate Infinity’s proprietary technologies, ensuring that the speaker components not only provide outstanding sound quality but also durability and longevity. The innovative design elements and high-grade materials reflect Infinity's commitment to performance, making these loudspeakers suitable for a wide range of vehicles and listening preferences.

In conclusion, the Infinity 5010cs, 6810cs, and 6010cs automotive loudspeaker components showcase the brand's dedication to exceptional audio performance, advanced technology, and user-friendly features. Whether you are a casual listener or a dedicated audiophile, these systems offer a compelling upgrade to your vehicle's audio experience.