Installing an ink cartridge
To install the ink cartridge:
1.Locate the imprinter access door on the back of the scanner.
2.Slide your fingers under the imprinter access door handle and pull the door toward you.
3.Lift the imprinter access door off the scanner.
4.Slide the ink cartridge carrier out of its position.
5.Raise the locking bar.
6.Remove the empty ink cartridge, if one is present.
NOTE: Dispose of empty ink cartridges properly. Do not incinerate ink cartridges.
7.Insert a new ink cartridge.
8.Lower the locking bar around the ink cartridge.
9. Slide the ink cartridge carrier into its position.
NOTE: You may change the ink cartridge carrier positions. Refer to the following section, “Setting the imprinter position.”
10. Replace the imprinter access door.
