3. Manually rotate and wipe the feed module s with a roller cleaning pad.

4.Inspect the feed module.

If the feed module tires show signs of wear or damage, replace the tires or the feed module.

5.Remove any dust or debris from the tray area under the feed module and the front roller cover.

6.Insert the feed module by aligning the pins and pushing it toward the right to fit it into position.

7.Re-install the front roller cover.

8.Go to the next section to clean the drive rollers and transport area.

Cleaning the drive rollers 1. Manually rotate and wipe the drive rollers with a roller cleaning pad. and transport area

2. Clean any dust or debris in the slots around the drive rollers.

26

A-61167 April 2005

Page 30
Image 30
Kodak A-61167 manual