Kodak A-61167 manual Imprinter specifications

Imprinter specifications

The resolution of the character fonts is 96 dpi across the width of the scanner. However, the font resolution varies with the direction that the paper is fed into the scanner. This variable allows the creation of an easy-to-read character string. The approximate resolution of the printed output is shown below.

Resolution (dpi)

	Small	Large
Cine	85 dpi	63 dpi
Comic	115 dpi	85dpi

Changes to the print string, other than automatic, sequential number advances, require a host command to restart the imprinter. You must initiate a change between documents or batches. Changes cannot be done automatically or between documents “on the fly.”

NOTE: The minimum document width for using the imprinter is 14 cm (5.5 in.).

Maximum lines	1
Print locations (horizontal)	14, manually set
Print locations (vertical)	Set by host
Print orientation	Cine or Comic
Font size	Large or Small
Ink cartridge	HP51604A or compatible
Print side	Rear (post-scan)
Minimum imprinting distance	0.89 cm (0.35 in.)
from document edge
Static fields available	User-specified via host
Dynamic fields available	Up to nine-digit sequential document
	number, date, four-digit time
Languages supported	Any phonetic language (for example,
	Danish, Dutch, English, Finnish, French,
	German, Italian, Norwegian, Portuguese,
	Spanish, Swedish)

A-61167 April 2005 C-17