System requirements
Minimum system configuration
Recommended system configuration
10
To operate the scanner, the following minimum configuration is required.
NOTES: The actual performance of the system depends upon the scanning application, choice of scanning parameters, and the host computer configuration. If the scanner is not performing at the optimal speed, a faster computer and/or more RAM may be necessary to obtain the rated throughput.
•IBM PC (or compatible) with a Pentium III 1 GHz processor
-i260 Scanner: for scanning at 300 dpi with deskew, you will need at least a 1.8 GHz processor for
-i280 Scanner: for scanning at 300 dpi with deskew, you will need at least a 2.5 GHz processor for
•Microsoft Windows 98SE, Windows Millennium Edition (Me), Windows 2000, or Windows XP
•100 MB of available hard disk space (200 MB is recommended)
•128 MB of RAM
•Monitor (VGA)
•Mouse
To operate the scanner at its optimum speed, the following configuration (or better) is recommended.
NOTE: The actual performance of the system depends on the scanning
application, choice of scanning parameters, and the host computer configuration.
•IBM PC (or compatible) with a Pentium IV 3.2 GHz processor
•Microsoft Windows 98SE, Windows Millennium Edition (Me), Windows 2000, or Windows XP
•200 MB of available hard disk space
•512 MB of RAM
•Additional memory (SODIMM) installed in the scanner
-i250 Scanner: up to 256 MB of memory is allowed
-i260 Scanner: up to 256 MB of memory is allowed
-i280 Scanner: up to 512 MB of memory is allowed
•Monitor (VGA)
•Mouse
