6. Remove the ink cartridge from its packaging.
NOTE: Detailed information about installing ink cartridges may be found later in this chapter.
7.Place the ink cartridge in the ink cartridge carrier.
8.Lower the locking bar around the ink cartridge.
9.Push the connector on the imprinter cable firmly into the ink cartridge carrier.
10. Slide the ink cartridge carrier into the desired position.
NOTE: Detailed information about setting the imprinter position may be found later in this chapter.
11.Replace the imprinter access door.
12.
13.Go to the next section to install the ink blotter strips in the scanner.
