Optional accessories
Preparing documents for scanning
•Kodak i200 Series
•Kodak i200 Series Dockable
NOTE: For information about ordering the above accessories, refer to Appendix B, Supplies and Accessories.
•Additional memory
•A batch of documents to be fed into the scanner must be arranged so that the leading edges of all documents are aligned and centered under the automatic document feeder. This allows the feeder to introduce documents into the scanner one at a time. Documents must be positioned face down for scanning.
•Staples and paper clips in documents may damage the scanner. Remove all staples and paper clips before scanning.
•Torn, damaged, or crushed pages can be transported successfully through the scanner. However, no scanner can transport every possible type of damaged paper. If in doubt about whether a specific damaged document can be transported through the scanner, place the document in a clear protective sleeve. Sleeves should be manually fed, one at a time, folded edge first, while lifting the gap release lever.
NOTES: You also can use the optional Kodak i200 Series Dockable Flatbed to scan damaged documents.
In addition, the automatic document feeder on the i280 Scanner can scan irregularly shaped documents (e.g., pages with coupons removed or documents with large holes or cutouts in them) when you use Special Document mode. For more information, refer to the section “Additional Features.”
•When scanning documents in a clear protective sleeve, the input tray guides must be adjusted to accommodate the width of the sleeve.
NOTE: Kodak scanners have been tested with a range of documents that represent the broad spectrum of document types found in the most common business applications. Optimal scanner performance is achieved when scanning documents within the recommended document specifications. Scanning documents that are outside of these specifications may lead to undesirable results in terms of scanner reliability, image quality, and/or consumable life.
3 |
