Kodak A-61167 manual

12.Attach the end of the imprinter cable that has the metal block (ferrite block end) to the connector in the opening on the circuit board cover.

13.Peel off the backing from the first self-stick hook-and-loop pad that is attached to the imprinter cable.

14.Align the imprinter cable along the channel in the circuit board cover and press the first self-stick hook-and-loop pad firmly to attach it to the circuit board cover.

15.Continue to align the imprinter cable along the channel in the circuit board cover until it is behind the circuit board cover.

C-6 A-61167 April 2005