Maintenance, Blower Intake | RIDGID WD1665 instruction

Assemble the Detachable Blower for “Blowing”

This may be assembled three ways.

1.Insert the small end of one of the exten- sion wands into the blowing port of the detachable blower. Insert the male- male adapter into the extension wand and install the blower nozzle onto the male-male adapter.

-OR -

2.Insert the male-male adapter into the blowing port of the detachable blower. Connect the large end of the extension wand to the male-male adapter. Con- nect the blower nozzle to the extension wand. If the additional reach is not needed, simply omit the wand, and con- nect the blower nozzle to the male to

Blowing

Port

Blower Nozzle

male adapter.

3.The wet/dry vac may also be used for blowing using the seven foot hose sup- plied with the wet/dry vac. Install the male/male adapter in the blowing port of the wet/dry vac. The male/male adapter will insert into the inside of the push button end of the vac hose. Assemble the hose to the male/male adapter and connect the blower nozzle to the opposite end of the hose. The unit is ready for blowing applications.

4.Turn the blower “ON” by toggling the switch in the handle of the blower to the “ON” position.

Blower Nozzle

Male/Male

Adapter

Male/Male	Hose
Adapter

Maintenance

Blower Intake

WARNING: To reduce the risk of injury from accidental starting, unplug power cord before changing or cleaning filter or foam pad.

After using the detachable blower of your wet/dry vac, examine the bottom of the blower for dust and debris. Check to see if the intake to the blower has debris stuck to the plastic vents and foam pad.

To clean the foam pad under the intake shield of the detachable blower:

1.Remove the three screws holding the intake shield.

2.Lift the intake shield off and set aside.

3.Lift the foam pad away from the detached blower, the foam pad holder will also lift away from the blower.

4.Remove the foam pad from pad holder and set the foam pad holder to the side.

Foam Pad Holder

Foam Pad

Intake Shield

Screws (3)

Clean the foam pad in warm soapy water or brush debris away. Allow foam pad to dry.

5.Examine foam pad for reuse. If you need to replace it, check the service part section of this manual.

WD1665 specifications

The RIDGID WD1665 is a powerful and versatile wet/dry vacuum designed to handle a variety of clean-up tasks, making it an essential tool for both home and professional use. It boasts a robust 16-gallon capacity, allowing users to tackle larger jobs without the need for constant emptying. This vacuum's impressive size is complemented by its powerful 6.5 horsepower motor, which delivers strong suction power, making it effective at picking up both wet and dry debris.

One of the standout features of the WD1665 is its innovative filtration system. It comes equipped with a RIDGID proprietary fine-dust filter that efficiently captures fine particles, ensuring cleaner air is released back into the environment. Moreover, this filter can be easily cleaned and is reusable, which not only saves on replacement costs but also promotes sustainability.

The vacuum is designed with user convenience in mind. It features a lock-on hose that securely attaches to the vacuum, preventing any accidental disconnections during use. The 7-foot locking hose is highly flexible and durable, allowing for extensive reach in various cleaning scenarios. With multiple attachments included, such as a crevice tool and a utility nozzle, users can easily adapt the vacuum to suit different surfaces and cleaning tasks.

For enhanced maneuverability, the RIDGID WD1665 is built with a sturdy cart and large rear wheels, making it easy to transport over various terrains. The vacuum also features a top carry handle, simplifying lifting and relocation. Additionally, the power cord is a generous 20 feet long, providing ample reach without the hassle of frequent unplugging.

Durability is another key characteristic of the RIDGID WD1665. Constructed with high-quality materials, this vacuum is built to withstand regular use across various environments, from job sites to home workshops. Its rugged design ensures it remains reliable even in tough conditions.

In summary, the RIDGID WD1665 is a high-capacity wet/dry vacuum that combines powerful suction, advanced filtration, and user-friendly features, making it a top choice for anyone looking to efficiently manage debris and maintain a clean workspace. Its combination of performance, durability, and practicality makes it an indispensable tool for carpenters, contractors, and homeowners alike.