Scag Power Equipment GC-STWC-CS61V manual Introduction

Page 3

1.1 INTRODUCTION

This manual has been prepared to provide the information you need to correctly assemble, operate, and maintain this grass catcher. Read it carefully and keep it for future reference.

The replacement of any part on this product by other than the manufacturer's authorized replacement part may adversely affect the performance, durability or safety of this product.

USE OF OTHER THAN ORIGINAL SCAG REPLACEMENT PARTS WILL VOID THE WARRANTY.

If additional information or service is needed that is not outlined in this manual, please contact your Scag Power Equipment dealer. Scag dealers are trained in the latest service methods and carry a full line of Scag replacement parts.

When ordering parts, always provide the complete model number of your catcher.

All information provided in this manual is based upon information available at the time of printing. Scag Power Equipment reserves the right to make changes at any time without notice or obligation.

1.2 DIRECTION REFERENCE

The "Right" and "Left", "Front" and "Rear" of the machine are referenced from the normal operating position.

2.1SAFETY AND OPERATING INSTRUCTIONS

-NOTE-

To avoid personal injury, it is imperative that all safety instructions be observed.

1.Read this operator's manual and the operator's manual that is supplied with the machine this attachment is used on.

A replacement manual is available from your authorized Scag Service Dealer or by contacting: Scag Power Equipment, Service Department at P.O. Box 152, Mayville, WI 53050. You may also contact us through our website at www.scag.com. The manual for this grass catcher can be downloaded by using the model and serial number or use the contact form to make your request. Please indicate the complete model and serial number of your Scag product when requesting replacement manuals.

WARNING

DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING KIT, OR ENTIRE GRASS CATCHER INSTALLED

2.Before dumping the debris, disengage the mower, stop the engine and wait for all movement to stop.

3.ALWAYS turn the engine OFF, remove the key and wait for all movement to stop before servicing or cleaning the mower or the grass catcher.

DANGER

ROTATING BLOWER

BLADES

STOP ENGINE BEFORE

ENTERING CHUTE

CONTACT CAN INJURE

4.Do not modify or alter any component of the grass catcher attachment or mower.

5.Do not allow any passengers to ride on the grass catcher attachment or on the mower.

2.2 GRASS CATCHING OPERATION

1.With the hopper door closed, engage the deck drive.

2.Proceed to mow until the hopper is full.

1

Image 3
Contents OPERATOR’SMANUAL GC-STWC-CS61V with a serial number of B9300001 to B9399999 Remember Your Mower is only AS Safe AS the OperatorIntroduction When dumping the hopper into a disposal area Assembly Instructions for 61 Cutter Deck Hair Locking Bolts Pin Page Grass Catcher Removal Instructions Maintenance NGE GC-STWC-CS61V Blower Housing AssemblyRef. Part No. Number Description GC-STWC-CS61V Blower Mounting Components Part Number Description GC-STWC-CS61V Hopper Components 483038 Hopper, GC-STC-CS 482732 Door, GC-CS 461626 482871 482275 GC-STWC-CS61V DecalsLimited WARRANTY- Commercial Accessory Scag Power Equipment