Scag Power Equipment SE-3.5BS Safety and Operating, Instructions Contd, Handle Gasoline With Care

Page 6

SAFETY AND OPERATING

3.

After operating the edger, stop the engine and

INSTRUCTIONS (CONT'D)

 

allow the engine to cool before refueling.

 

 

 

4.

To reduce the risk of fire, replace the gasoline cap

n Keep Hands And Feet From Blade

 

securely after adding fuel to the tank.

 

5.

Use an approved gasoline container.

The rotating blade is sharp and can severely cut body parts. The blade coasts after the edger is turned off (See Figure 2).

Figure 2, Protect Hands And Feet

1.Keep both hands on the handles when the blade is rotating.

2.Keep your feet and hands away from the cutting area.

3.Do not attempt to remove cut material or hold material to be cut when the engine is running or the blade is moving.

4.Make sure the spark plug wire is disconnected when clearing jammed material from the blade or cutter head.

5.Disengage the blade and stop the engine when the edger is transported or not in use.

nHandle Gasoline With Care

1.Gasoline is highly flammable. Never add gasoline to a running or hot engine.

2.Refuel outdoors in an open area only. Never fill the gasoline tank indoors.

6.Do not store gasoline in a house.

7.If gasoline is spilled on the ground, move the edger and the gasoline container from the area and do not create a source of ignition.

8.If gasoline is spilled on clothing, remove the stained clothes and replace them with clean, dry clothes before operating the edger.

nFollow Maintenance Instructions Carefully

1.Disconnect the spark plug lead before servicing any part of the edger.

2.To reduce the risk of fire, do not allow excessive grass, leaves, lubricants or gasoline to accumulate on the edger.

3.Do not attempt to make repairs other than those identified in this manual. Repairs not detailed in this manual should be performed by an authorized Scag dealer. See that only identical replacement parts are used.

4.When cleaning, repairing, or inspecting the edger, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire.

5.When lifting or transporting the edger, firmly grasp a solid part of the frame. Do not lift the edger by the clutch or height adjustment assemblies. Blade is sharp! Be careful of the blade when lifting.

6.Do not run the edger indoors; exhaust fumes are dangerous.

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual Remember Your Edger is only AS Safe AS the Operator SE-3.5BS with a serial number of 4800001Table of Contents Safety and Operating Instructions IntroductionCheck The Edger Before Use Safety and Operating Instructions ContdDress Properly, Operate With CareInstructions Contd Safety and OperatingFollow Maintenance Instructions Carefully Keep Hands And Feet From BladeSetup & Operation AssemblyProtect Operators Before Operation Setup & Opperation ContdOperating Instructions OperationMaintenance Changing Engine OilChanging The Belt Maintenance Contd Belt TensionRubber Debris Deflector LubricationTroubleshooting Guide Problem CauseLawn Edger SE-3.5BS Lawn Edger SE-3.5BS Ref. Part DescriptionLimited WARRANTY- Commercial Accessory 1998

SE-3.5BS specifications

The Scag Power Equipment SE-3.5BS is a high-performance walk-behind string trimmer designed for both professional landscapers and residential users seeking reliability and power. It stands out in a crowded market due to its exceptional build quality, innovative features, and advanced technologies that improve efficiency and ease of use.

One of the main features of the SE-3.5BS is its robust 3.5 horsepower Briggs & Stratton engine. This powerful engine provides sufficient torque for demanding tasks such as trimming thick grass and tackling weeds in hard-to-reach areas. The engine is engineered for smooth operation and reduced emissions, aligning with eco-friendly practices in landscaping.

Equipped with a durable 22-inch cutting swath, the SE-3.5BS allows users to cover large areas quickly. The cutting head is designed to accommodate various line types, which can be easily replaced, ensuring that the trimmer can handle a wide range of vegetation. The adjustable cutting height further adds to its versatility, allowing operators to customize their mowing height based on the task at hand.

An innovative feature of the Scag Power Equipment SE-3.5BS is its ergonomic design. It comes with a comfortable handle that minimizes user fatigue during extended periods of use. The handle is also adjustable, providing users of all heights with an optimal grip and control. Additionally, the machine incorporates a heavy-duty steel frame, ensuring durability and longevity, even under the rigors of frequent use.

The SE-3.5BS also boasts advanced safety features, including a protective shield around the cutting head to prevent debris from flying into the operator's workspace. The design is not only focused on performance but also emphasizes user safety, making it a trusted choice among landscape professionals.

Ease of maintenance is another significant characteristic of this model. The integrated design allows for straightforward access to the engine and cutting components, facilitating regular maintenance checks and repairs. This aspect can save time and money in the long run, making the SE-3.5BS a wise investment.

In summary, the Scag Power Equipment SE-3.5BS combines power, efficiency, and user-friendly design. Its features, technologies, and robust construction make it a standout choice in the walk-behind string trimmer market, suitable for tackling a diverse range of landscaping tasks with ease.
Top Page Image Contents