Scag Power Equipment SE-3.5BS manual Maintenance, Changing Engine Oil, Changing The Belt

Page 9

SETUP & OPPERATION (CONT'D)

3.Push the edger forward slowly, adjust your pace to the engine's capacity.

Figure 7, Engaging The Blade

MAINTENANCE

CAUTION:

To prevent injury from rotating parts turn the engine stop switch to OFF and disconnect the spark plug wire from the engine before attempting any maintenance.

nChanging Engine Oil

Oil should be changed after the first 20 hours of use and then after every 50 hours of use.

1.Start the engine and allow it to warm up.

2.Turn the engine switch to OFF. Make sure the blade has stopped turning. Disconnect the spark plug wire.

3.Carefully clean all debris from around the oil filler cap. Remove the cap.

4.Remove the oil drain plug and drain the oil into an appropriate container.

5.After the oil is drained, replace the drain plug and refill the crankcase to the level specified in the engine owner's manual.

6.Replace the oil cap.

7.Dispose of the used oil properly.

nChanging The Belt

1.Remove the flat bar belt guide at the front of the spindle boom assembly (See Figure 8).

2.Remove the old belt.

3.Install the new belt. Do not attempt to pry or force the belt into the pulley grooves as this may damage the belt.

4.Replace the front belt guide.

Figure 8, Belt Replacement

6

Page 8 Page 10
Image 9
Page 8 Page 10
Contents OPERATOR’S Manual SE-3.5BS with a serial number of 4800001 Remember Your Edger is only AS Safe AS the OperatorTable of Contents Introduction Safety and Operating InstructionsDress Properly, Safety and Operating Instructions ContdCheck The Edger Before Use Operate With CareFollow Maintenance Instructions Carefully Safety and OperatingInstructions Contd Keep Hands And Feet From BladeSetup & Operation AssemblyProtect Operators Operating Instructions Setup & Opperation ContdBefore Operation OperationMaintenance Changing Engine OilChanging The Belt Belt Tension Maintenance ContdLubrication Rubber Debris DeflectorProblem Cause Troubleshooting GuideLawn Edger SE-3.5BS Ref. Part Description Lawn Edger SE-3.5BSLimited WARRANTY- Commercial Accessory 1998

SE-3.5BS specifications

The Scag Power Equipment SE-3.5BS is a high-performance walk-behind string trimmer designed for both professional landscapers and residential users seeking reliability and power. It stands out in a crowded market due to its exceptional build quality, innovative features, and advanced technologies that improve efficiency and ease of use.

One of the main features of the SE-3.5BS is its robust 3.5 horsepower Briggs & Stratton engine. This powerful engine provides sufficient torque for demanding tasks such as trimming thick grass and tackling weeds in hard-to-reach areas. The engine is engineered for smooth operation and reduced emissions, aligning with eco-friendly practices in landscaping.

Equipped with a durable 22-inch cutting swath, the SE-3.5BS allows users to cover large areas quickly. The cutting head is designed to accommodate various line types, which can be easily replaced, ensuring that the trimmer can handle a wide range of vegetation. The adjustable cutting height further adds to its versatility, allowing operators to customize their mowing height based on the task at hand.

An innovative feature of the Scag Power Equipment SE-3.5BS is its ergonomic design. It comes with a comfortable handle that minimizes user fatigue during extended periods of use. The handle is also adjustable, providing users of all heights with an optimal grip and control. Additionally, the machine incorporates a heavy-duty steel frame, ensuring durability and longevity, even under the rigors of frequent use.

The SE-3.5BS also boasts advanced safety features, including a protective shield around the cutting head to prevent debris from flying into the operator's workspace. The design is not only focused on performance but also emphasizes user safety, making it a trusted choice among landscape professionals.

Ease of maintenance is another significant characteristic of this model. The integrated design allows for straightforward access to the engine and cutting components, facilitating regular maintenance checks and repairs. This aspect can save time and money in the long run, making the SE-3.5BS a wise investment.

In summary, the Scag Power Equipment SE-3.5BS combines power, efficiency, and user-friendly design. Its features, technologies, and robust construction make it a standout choice in the walk-behind string trimmer market, suitable for tackling a diverse range of landscaping tasks with ease.
Top Page Image Contents