Scag Power Equipment SWZ manual Before Starting To Start Engine, Turn key switch on

BEFORE STARTING TO START ENGINE

3Check belts for:

•Proper tension

•Fraying and wear

•Twisting

•Cracking

3Check initial tension of the cutter blade drive belts. If belts are not properly tensioned, see Adjustments, page 6&7.

3Check oil levels in the engine and hydraulic reservoir.

3Fill the fuel tank with clean, fresh lead-free gasoline.

-NOTE-

For best engine performance, SCAG rec- ommends using gasoline with an octane rating no less than 87.

-NOTE-

Read and understand the instructions on safety before attempting to operate the mower.

1. Open the fuel valve.

SGB108

Fuel Valve

(Open position is Down)

2.Pull speed control lever to NEUTRAL position.

3.Pull the mower PTO engagement switch down to STOP position.

-NOTE-

Neutral latches must be in NEUTRAL

LOCK position for startup.

4. Turn key switch on.

-NOTE-

Some engines are recoil start models, oth- ers are electric; manual choke locations will vary.

Speed Control

In Neutral

NEUTRAL

SLOW

FAST

Throttle

Adjustment

SLOW

STOP

START

FAST

CHOKE

Neutral Latch Position (both handles)

ON

OFF

Blade Clutch In Stop Position

Key Switch On

Starting Engine

4

SGB104