Scag Power Equipment SWU manual Technical Specifications, Engine

Page 17

 

TECHNICAL SPECIFICATIONS

MODELS

SWU36A-15KA, SWU48A-17KA, SWU52A-17KA

ENGINE

 

General Type:

Heavy duty industrial/commercial

Brand / Model:

Kawasaki FH451V, Kawasaki FH500V

Horsepower:

Kawasaki FH451V = 15HP maximum @ 3600 RPM

 

Kawasaki FH500V = 17HP maximum @ 3600RPM

Type:

Kawasaki = 15HP 4 cycle gas, air cooled, V twin cylinder, vertical shaft engine

 

Kawasaki = 17HP 4 cycle gas, air cooled, V twin cylinder, vertical shaft engine

Displacement:

Kawasaki FH451V = 426 cc; Kawasaki FH500V = 494 cc

Cylinder:

Kawasaki FH451V & FH500V = 2 cast-iron sleeves

Governor:

Mechanical type governor with variable speed control. Settings:

 

Kawasaki = 3600 rpm(+/- 75rpm), idle set at 1550 rpm (+/- 75 rpm)

Air Cleaner:

Kawasaki = Semi-cyclone type with dual element

Exhaust:

Single canister side mount muffler.

Fuel Pump Group:

Kawasaki = Pulse-type fuel pump with in-line fuel filter

Oil Pump Group:

Kawasaki = Full pressure lubrication with oil filter

Starter/Electrical:

Electronic ignition with recoil starter

ENGINE DECK

 

Thickness:

7 gauge steel.

Fuel Tank:

5 gallon (19.0 liters) seamless polyethylene.

Drive Wheels/Tires:

15.0 x 6.0-6 two-ply pneumatic tubeless.

Handle Bars:

1-1/4" diameter.

DRIVE SYSTEM

 

Type:

Belt drive with twin power belts for increased friction to pulley surface and

 

"Adjust-A-Grip" traction control lever with three settings

Transmissions:

Peerless 5-speed transmission, Model #700-070A with 9 spline coupler shaft

Steering/Travel Control:

Clutch/brake fingertip steering, key lock switch. ("Adjust-A-Grip"

 

design allows minimum hand force to operate controls)

Brakes:

6" drum, band brake, one on each wheel.

Axles:

1"

Wire Harness:

14 gauge wire.

Safety Group:

Hand actuated operator presence system with blade clutch and

 

transmission interlock to engine kill

Forward Speed Range:

1.5 to 7.0 mph

Reverse Speed Range:

3.0 mph

Date of Issue: October, 2000

Specifications Subject to Change Without Notice

13

Image 17
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator Table of Contents Illustrated Parts List General Safety Instructions Introduction Signal WordsISO Symbols Fast Slow Before Operating While Operating Do not operate where conditions are slipperyFalling Hazard USE only Scag Approved Riding Attachments Maintenance and StorageUse gasoline with an octane rating no less than Mower OperationADJUST-A-GRIP Settings Cutter Deck Belt AdjustmentsTransmission Drive Belt Drive Control Adjustments Cutter Blades Adjusting Cutting HeightMobilux #2 Mobil service stations Lubrication & MaintenanceCondition Cause Cure Troubleshooting Cutting ConditionsUneven Cut on Flat Scalping Blades Engine Technical SpecificationsCutter Deck Page Cutter Deck Ref. Part No. Number Description 48 & 52 Cutter Decks Part Description Deck Frame Ref. Part No. No. Description 48 & 52 Deck Frame Tire Valve, Purchase Locally Engine Deck Wire Harness Adaptor, 17KA Handle Assembly 15KA 17KA Instrument Panel REF. Part NO. no Description For Reference Only Order Parts from Peerless / TecumsehHandle Wire Harness Manual Start Wire Harness Adapter / Kawasaki 481863 Heavy-Duty Commercial 1 2 3 4 Limited Warranty Commercial Equipment 2000

SWU specifications

Scag Power Equipment, a leading manufacturer in the outdoor power equipment industry, has established a reputation for its commitment to quality, performance, and innovation. One of their standout products is the SWU series, known for its durability and advanced technology designed to meet the demands of landscape professionals and serious homeowners alike.

The Scag SWU series is best known for its robust construction and superior mowing capabilities. Built with a heavy-duty steel frame, these mowers ensure long-lasting performance even under the toughest conditions. The SWU is equipped with a powerful engine, typically a commercial-grade Kohler or Vanguard engine, providing unparalleled power and efficiency. This means users can tackle larger lawns and more demanding terrain without the fear of stalling or bogging down.

One of the key features of the SWU series is its exceptional cutting technology. The mower's precision-engineered cutting deck is designed to deliver a smooth, even cut for a pristine finish. The deck height can be easily adjusted to suit various mowing needs, allowing for versatility in handling different grass types and conditions. Scag's proprietary blade design further enhances cutting performance, allowing users to efficiently mulch or bag grass clippings.

The SWU series also prioritizes user comfort and ease of operation. Ergonomically designed controls put everything within easy reach, ensuring a more enjoyable mowing experience. The seating is plush and adjustable, reducing fatigue during extended usage. Additionally, the SWU incorporates advanced vibration damping technology which minimizes operator fatigue, making it easier to handle large mowing tasks.

Maintenance is made simple with Scag's thoughtful design. The SWU features easy-access points that allow operators to check fluids, clean the deck, and perform routine maintenance without hassle. This not only prolongs the life of the mower but also keeps it operating at peak performance.

In summary, Scag Power Equipment's SWU series combines strength, precision, and user-friendly features to set a high standard in the mowing industry. With its powerful engines, advanced cutting technology, and focus on operator comfort, the SWU provides professional results for users seeking efficiency and reliability in their lawn care arsenal. Whether for commercial applications or residential use, the SWU series is a valuable addition to any landscaping toolkit.