Recommendations For Mowing | Scag Power Equipment STWC48V-25CV

Section 4

4.11Moving Mower With Engine Stopped

1.To “free-wheel” or move the mower around without the engine running, rotate the dump valve levers counter-clockwise open. See Figure 4-4. Disengage the parking brake and move the mower by hand. When the machine is in the desired position, engage the parking brake and rotate the levers clockwise until they stop (closed). The dump valve levers must be returned to the CLOSED position and torqued to 10 lb-ft to drive the mower.

DUMP VALVE

CONTROL LEVERS

STC 2001 DVC

Figure 4-4. Dump Valve Control

4.12 Recommendations For Mowing

1.Do not mow with dull blades. A dull blade will tear grass, resulting in poor lawn appearance and reduced mowing power.

WARNING

DO NOT operate without Discharge Chute, Mulching Kit, or entire Grass Catcher properly installed.

2.The discharge chute must not be removed and must be kept in the lowest position to deflect grass clippings and thrown objects downward. Direct the side discharge away from sidewalks or streets to minimize cleanup of clippings. When mowing close to obstacles, direct the discharge away from the obstacles to reduce the chance of property damage by thrown objects.

3.Cut grass when it is dry and not too tall. Do not cut grass too short (cut off 1/3 or less of existing grass for best appearance). Mow frequently.

4.Keep mower and discharge chute clean.

5.When mowing wet or tall grass, mow the grass twice. Raise the mower to the highest setting for the first pass and then make a second pass to the desired height.

6.Use a slow travel speed for trimming purposes.

7.Operate the engine at full throttle for best cutting. Mowing with a lower RPM causes the mower to tear the grass. The engine is designed to be operated at full speed.

8.Use the alternate stripe pattern for best lawn appearance. Vary the direction of the stripe each time the grass is mowed to avoid wear patterns in the grass.

4.13 Adjusting Cutting Height

The mower deck can be adjusted from a height of 1-1/2 inches to 5-1/2 inches at 1/4-inch intervals. To adjust the cutting height:

WARNING

DO NOT adjust the cutting height with the mower blades rotating. Disengage the power to the cutter blades and then adjust cutting height.

1.Disengage the power to the cutter blades.

2.Push the cutting height adjustment foot pedal all the way forward using your right foot until it locks in place. See Figure 4-5.

HEIGHT ADJUSTMENT

PEDAL

1/4

1 2

		3/4
	1/2	2
1/4	3
4
5
HEIGHT
CUTTING

LANYARD

STC 2006 ACH

Figure 4-5. Adjusting Cutting Height

STWC48V-25CV, STWC48V-26KA-LC specifications

Scag Power Equipment has established a reputation for producing high-quality lawn care equipment, and the STWC48V-26KA-LC and STWC48V-25CV models exemplify this commitment to performance and durability. These walk-behind mowers are designed to handle a variety of mowing tasks while delivering a superior cutting experience.

The STWC48V-26KA-LC features a robust 26 HP Kawasaki engine, known for its reliability and fuel efficiency. This engine provides ample power to tackle tough grass and uneven terrain, ensuring that the mow is both efficient and effective. The 48-inch cutting deck allows for a wider mowing swath, reducing the time spent on larger properties. It is equipped with Scag's innovative Velocity Plus deck design, which promotes superior airflow, resulting in a clean and even cut while minimizing clumping.

Moreover, the STWC48V-26KA-LC includes an adjustable cutting height feature, allowing users to choose from a range of settings to achieve the desired grass height. The ergonomic controls and comfortable operator platform enhance usability, ensuring that even extended mowing sessions are not taxing on the user. Additionally, the machine's heavy-duty construction ensures longevity and resistance to wear and tear.

On the other hand, the STWC48V-25CV model comes with a 25 HP Vanguard engine, providing a powerful and smooth mowing experience. Like its counterpart, it features a 48-inch cutting deck that facilitates efficient mowing over larger areas. The high-performance cutting system ensures that the grass is cut cleanly, promoting healthy grass growth and an appealing lawn appearance.

Both models are equipped with advanced technologies that aid in ease of operation. The handle design allows for one-hand operation, and the speed control ensures precision while navigating corners and obstacles. Furthermore, the durable wheels and casters enhance maneuverability and stability on varied terrains, making them ideal for both residential and commercial use.

From the durable construction to the powerful engines and innovative cutting technologies, both the STWC48V-26KA-LC and STWC48V-25CV ensure that lawn care tasks are completed efficiently and effectively. Scag Power Equipment continues to set the standard in the lawn care industry with these reliable and high-performing walk-behind mowers. Users can confidently invest in these models, knowing they are backed by Scag's commitment to quality and performance.