Remington AT3017BCA owner manual Servicing Pole Trimmer, Blade Replacement

Page 9

OWNER’S MANUAL

SERVICING POLE TRIMMER

The Pole Trimmer is a double-insulated tool and contains some parts that can only be replaced with original parts by an Autho-

rized Service Center. Visit our Technical Service web site at www.desatech.com

or contact ourTechnical Service Department at 1-800-858-8501 (English Only) for the nearest Authorized Service Center.

The parts listed on pages 12 and 13 are considered to be user replaceable. See Re- placement Parts and Accessories, page 10, for information on ordering these parts.

BLADE REPLACEMENT

WARNING:To prevent serious personal injury,wear gloves when removing and installing the cut- ter blades. Do not place fingers or hands between blades where they could get cut.

1.Unplug pole trimmer from power supply.

2.Place pole trimmer upside down on workbench and remove the four (4) bottom cover screws. Lift bottom cover off (see Figure 18).

Cover Screw

Bottom Cover

3.Remove M5 locknut and washer from cam (see Figure 19).

4.Align cam and cutter blade assemby. Remove cam. (see Figure 19).

M5 Locknut

Washer

Cam

Cutter Blade Assembly

Figure 19 - Removing Cam

5.Remove screw that holds down cutter blade assembly (see Figure 20). IM- PORTANT: Be sure not to loose the 8-32 locknut that secures this screw.

Screw

Cutter Blade

Assembly

Cam Flange

8-32 Locknut

Figure 20 - Removing Cutter Blade Assembly

6.Remove and dispose of cutter blade assembly.

7.Attach new cutter blade assembly to power head with screw and locknut removed in step 5.

8.Align cutter blade assembly so that the cam will fit properly into the oval- shaped lobes of the cutter blade assem- bly (see Figure 19). IMPORTANT: The large diameter flange of the cam must face upward away from the power head. The small diameter flange of the cam must line up with and sit directly on top of the cam flange.

9.Replace washer and locknut removed in step 3. Tighten securely.

10.Replace the bottom cover and se- cure with the 4 bottom cover screws removed in step 2 (see Figure 18). Tighten screws securely.

WARNING: All components must be installed and securely fastenedbeforepluggingpoletrim- mer into power supply. Failure to do so may cause product damage or serious personal injury.

Note: If binding occurs after reassembly, repeat all of the previous steps making sure that cam aligns properly with cutter blade assembly.

Figure 18 - Removing Bottom Cover from Trimmer Head

120050

9

For more information, visit www.desatech.com

Image 9
Contents Axcess Trimmer Safety Before Operating Pole TrimmerWhile Operating Pole Trimmer Maintenance Storage of Pole Trimmer UnpackingProduct Identification Connecting Extension Cord Pivoting the Power HeadOperating Pole Trimmer Extension CordsUnlocking the Trigger to Start the Pole Trimmer Starting the Pole TrimmerAdjusting Pole Length Using the Pole TrimmerOperating Positions Trimming Bottoms and Sides Hedges and Shrubs Trimming a HedgeTroubleshooting Cleaning and MaintenanceServicing Pole Trimmer Blade ReplacementTechnical Service Replacement Parts and AccessoriesRepair Service Warranty ServiceParts Central Pole Trimmer Model AT3017BCA Illustrated Parts BreakdownKEY Part Description QTY Parts ListElectric Pole Trimmer Limited Warranty Manual DEL Propietario Advertencias DE Seguridad Antes DE Operar LA Podadora DE PértigaMientras Opere LA Podadora DE Pértiga Mantenimiento Y Almacenaje DE LA Podadora DE Pértiga DesempaqueMantenga la podadora de pértiga con esmero Revise las piezas dañadasIdentificación DEL Producto Operación DE LA PodadoraGiro DE LA Cabeza DE Potencia Cordones DE Extensión Conexión DEL Cordón DE ExtensiónLongitud Del cordónDesbloqueo del gatillo para arrancar la podadora de pértiga Arranque DE LA Podadora DE PèrtigaRegulación DE LA Longitud DE LA Pértiga Posiciones DE OperaciónUSO DE LA Podadora DE Pértiga No trate de cortar ramas de más de 3/4 pulgadas de diámetro Podado DE UN SetoAnálisis DE Averías Limpieza Y MantenimientoReemplazo DE LA Cuchilla Servicio a LA Podadora DE PértigaServicio Técnico Accesorios Piezas DE RepuestoServicio DE Reparación Servicio CON GarantíaPodadora DE Pértiga Modelo AT3017BCA Desarme Ilustrado DE LAS PiezasPodadora Eléctrica DE Piezas Modelo AT3017BCA Lista DE PiezasLa Ports Central DE PiezasGarantía Limitada DE LA Podadora Eléctrica DE Pértiga Guide DU Propriétaire Consignes DE Sécurité Avant D’UTILISER LE TAILLE-HAIE À PercheUtilisation DU TAILLE-HAIE À Perche Entretien ET Entreposage DU TAILLE-HAIE À Perche DéballagePrenez bien soin du taille-haie à perche Recherchez les pièces endomma- géesIdentification DU Produit Utilisation DU TAILLE-HAIEPour Faire Pivoter LE Moteur Raccordement DE LA Rallonge Électrique Rallonge ÉlectriqueLongueur de Pieds 18 AWG 16 AWG 14 AWGVerrouillage du taille-haie en position « Marche » Démarrage DU TAILLE-HAIE À PerchePositions DE Fonctionnement Réglage DE LA Longueur DE LA PercheUtilisation DU TAILLE-HAIE Vous pencher ni à vous accroupirTaille d’une haie Taille D’UNE HaieDépannage Nettoyage ET EntretienLe moteur ne fonctionne pas lorsque vous Repoussez le bouton de verrouillageEntretien DU TAILLE-HAIE À Perche Remplacement DES LamesService Technique Pièces DE Rechange ET AccessoiresService DE Réparation Service Sous GarantieDépôt DE Pièces TAILLE-HAIE À Perche Modèle AT3017BCA Liste Illustrée DES PiècesNuméro Pièce Description Quantité Liste DE PiècesGarantie Limitée DU TAILLE-HAIE Électrique À Perche

AT3017BCA specifications

The Remington AT3017BCA is a state-of-the-art grooming tool designed for modern men who value both efficiency and precision in their personal care routines. Engineered for versatility, this grooming device is specifically tailored for beard and facial hair maintenance, making it an essential addition to any grooming kit.

One of the standout features of the AT3017BCA is its advanced self-sharpening stainless steel blades. These blades are designed to ensure a consistent cutting performance with each use, allowing for clean and precise grooming without the need for frequent replacements. The sharpness is maintained even after multiple usages, which enhances the longevity of the product.

Equipped with a lithium-ion battery, the Remington AT3017BCA boasts an impressive runtime of up to 70 minutes on a single charge. This means users can enjoy extended grooming sessions without the hassle of being tethered to an outlet. For added convenience, a quick charge feature allows for a short charge time that translates into a decent grooming session, ensuring you’re never left unprepared.

The ergonomic design of the AT3017BCA ensures a comfortable grip and effortless maneuverability, allowing users to navigate the contours of their face with ease. This is particularly important for achieving detailed styles and edges, such as sharp lines and precise fades, which are essential for a well-groomed appearance.

Additionally, the device is equipped with multiple length settings facilitated by adjustable combs. These combs provide versatility across various hair lengths, enabling users to achieve different styles—be it a close shave, a neatly trimmed beard, or a longer, more rugged look.

The waterproof feature of the AT3017BCA further enhances its appeal, as it allows for easy cleaning under running water. This not only simplifies maintenance but also promotes hygiene, ensuring that the device remains in optimal condition for performing at its best.

Furthermore, the AT3017BCA integrates advanced technology aimed at reducing skin irritation, making it suitable even for those with sensitive skin. This consideration for user comfort underscores Remington’s commitment to delivering grooming solutions that cater to the diverse needs of its clientele.

In summary, the Remington AT3017BCA is an impressive grooming tool that combines functionality, quality, and user-friendly features. With its self-sharpening blades, long-lasting battery, ergonomic design, versatile length settings, and ease of maintenance, this device stands out as a top choice for men seeking to elevate their grooming experience.