Remington Power Tools 100271-01 Unpacking, Assembly, Drive Saw Chain Sprocket Guide Bar Bolts

Page 6

UNPACKING

1.Remove all items from carton.

2.Check all items for any shipping damage. If you find any damage or if any parts are missing, promptly inform dealer where you bought chain saw.

ASSEMBLY

!WARNING

 

Cutting

Towards

Edge

 

Guide

 

Bar Nose

Drive

Saw

Chain

Sprocket

 

Guide Bar

Bolts

Cutting edges on chain are sharp. Use protective gloves when handling chain.

IMPORTANT

Do not clamp chain saw in vise during assembly.

1.

Lay chain out flat.

2.

Remove guide bar nuts from guide bar bolts (see Figure 3).

3.

Turn adjusting screw counterclockwise (see Figure 4).

Guide Bar

Nuts

Sprocket

Support

Guide

Bar

Adjusting Hole

 

Continue to turn adjusting screw until adjusting block is to

 

rear of adjusting plate.

4.

Install guide bar onto saw body. Place rear of guide bar

 

between adjusting plate and sprocket support.

 

IMPORTANT: Make sure to insert adjusting block into

 

oval adjusting hole on guide bar.

5.

Attach guide bar nuts to guide bar bolts. IMPORTANT:

 

Tighten guide bar nuts finger tight only. Make sure

 

adjusting block is in oval adjusting hole on guide bar.

6.

Place chain around drive sprocket, then along top groove

 

of guide bar and around guide bar nose. Note: Make sure

 

cutting edges of chain are facing the right direction.

 

Position chain so cutting edges on top of guide bar face

 

guide bar nose (see Figure 3).

!CAUTION

Do not place chain on saw backwards. If chain is backwards, saw will vibrate badly and will not cut.

7.Adjust saw chain tension. Follow steps under Saw Chain Tension Adjustment, page 7.

8.If saw has 2-piece side cover, attach sprocket cover.

Figure 3 - Assembling Guide Bar, Chain, and Hand Guard

Sprocket

Support

Adjusting

Adjusting

Block

Plate

Adjusting

Screw

Figure 4 - Part Locations for Assembling Guide Bar

6

100273

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Contents Electric Chain SAWSymbols InformationBefore Operating Chain SAW Safety WarningsKickback Safety Devices On This Saw KickbackPushback and PULL-IN Saw Maintenance and Kickback SafetyMaintenance and Storage of Chain SAW Cause Of Pushback and Pull-InProduct Identification Chain SAW Names and TermsSprocket Support Adjusting Block Plate Screw AssemblyGuide Bar Nuts Sprocket Support Adjusting Hole UnpackingSAW Chain Tension Adjustment Filling OIL TankGuide Bar Nuts Correct Gap Tension Incorrect Tension Oiling Chain Operating Chain SAWExtension Cords Cutting with the Chain SAWBefore Felling a Tree Trimming a Tree PruningFelling a Tree Cutting Down a Tree Retreat Path Direction of Fall TreeFelling Procedure Limbing a TreeLog Supported On Both Ends Bucking a LOGLog Supported On One End Entire Length Of Log On GroundCare of Guide BAR Cleaning and MaintenanceCleaning SAW Body Sharpening Your SAW ChainRight side of chain Sharpening CuttersFiling Cutter Depth Gauges Depth Gauge Flat File Tool SlotStorage Replacement PartsRecycling Replacing Saw ChainTroubleshooting Observed Fault Possible Cause RemedyWarranty Information Keep this WarrantyLimited Warranty Electric Chain SAW

100271-01 specifications

Remington Power Tools' 100271-01 is a versatile and powerful addition to any homeowner's or professional's tool collection. This electric chainsaw is designed for cutting and pruning tasks, providing both convenience and efficiency. One of its standout features is its robust 16-inch bar and chain, which allows for cutting through a variety of wood sizes with ease. This length is perfect for tackling small to medium-sized trees and branches, making it an ideal choice for yard maintenance.

The 100271-01 is equipped with a powerful 12-amp motor, providing ample power to handle tough jobs. This electric chainsaw eliminates the hassle of fuel, ensuring that users can start their work with the push of a button. The benefits of an electric chainsaw include reduced emissions, quieter operation, and less maintenance compared to gas-powered counterparts. The lightweight design enhances maneuverability, reducing user fatigue during prolonged use.

Safety is also a top priority in the design of the Remington 100271-01. It comes with a chain brake feature that automatically stops the chain if kickback occurs, providing peace of mind during operation. Additionally, the unit includes a low kickback chain that further minimizes the risk of injury, making it suitable for both novice and experienced users. The easy-to-use tensioning system allows users to adjust chain tension quickly and without the need for additional tools, ensuring efficient and safe operation.

Another significant feature of the Remington 100271-01 is its ergonomic design. The handle is designed for comfort, offering a secure grip to reduce hand strain during extended use. This design consideration is crucial for users who may need to perform multiple cuts or work for extended periods.

In conclusion, the Remington Power Tools 100271-01 chainsaw combines power, safety, and user-friendly features. With its 16-inch bar, 12-amp motor, and focus on ergonomics and safety, it stands out as an excellent choice for anyone looking to maintain their outdoor space efficiently and effectively. Whether you are trimming branches or cutting firewood, this chainsaw provides the performance and reliability needed for a wide range of cutting tasks.
Top Page Image Contents