Sarlo BC-8 owner manual Troubleshooting Guide, Check Probable Causes Action

Page 12

TROUBLESHOOTING GUIDE

Case 1. Starting failure

CHECK

PROBABLE CAUSES

ACTION

Fuel tank

Incorrect fuel

Fuel filter

Fuel filter is clogged

Carburetor idle speed screw

Out of normal range

No spark

Spark plug is fouled/wet

 

Plug gap is incorrect

Spark plug

Disconnected

Drain it and fill with correct fuel Clean

Adjust to normal range Clean/dry

[Correct GAP .025" (0.6~0.7 mm)] Retighten

Case 2. Engine starts but does not keep running/Hard re-starting

CHECK

PROBABLE CAUSES

ACTION

Fuel tank

Carburetor idle speed screw Muffler, cylinder(exhaust port) Air cleaner

Cylinder fin, fan cover

Incorrect fuel or stale fuel

Out of normal range

Carbon is built-up

Clogged with dust

Clogged with dust

Drain it and fill with correct fuel Adjust to normal range

Wipe away Wash Clean

If your unit needs further service, please consult with an authorized service dealer in your area.

NOTES

10

Image 12
Contents Brush CUTTER/ Trimmer Model BC-8 Safety and International Symbols Symbol MeaningRules for Safe Operation Safety Rules Safety Rules Assembly Instructions Installing Cutting HeadShield Assembly Instructions Shield Assembly for Brush Cutter Blade High PositionUsing the Cutting Blade Operating InstructionsAdjusting Trimming Line Length Holding the TrimmerTips for Best Trimming Results Decorative TrimmingMaintenance Periodic Maintenance ChartSERVICE/ADJUSTMENTS Line Replacement Safety RulesRefilling Trimming Line Blade Replacement Safety Rules Replacement ProcedurePart Sequence Troubleshooting Guide Check Probable Causes ActionStorage Seasonal StorageFuel System EngineEngine/Motor/Moteur Illustrated Parts List Warranty Products Consumer Use Commercial/Rental Use