OPERATION - All mowers
To Start the engine
Refer to the engine manufacturer owner’s manual for detailed starting procedure. Ensure that the engine oil is at the correct level and that the fuel tank is full of fresh unleaded petrol.
Move the throttle control lever to the :- “CHOKE” position (where fitted) - or the “FAST” position and prime the engine. Refer to the engine manufacturer’s manual.
Grasp rope handle and pull slowly until resistance is felt. Then pull the cord rapidly to overcome compression, prevent kickback and start engine. Repeat if necessary.
If a “Choke” is fitted move the throttle control lever to the “FAST” position after the engine starts.
To Stop the engine
Move the throttle control lever to the “STOP” position
Wait till the engine comes to a complete stop before removing or fitting the grass catcher or mulch plug to the mower, or attempting any maintenance work on the mower.
OPERATION - Self Propelled mowers only
Engaging the Drive
Start the engine and move the throttle to the “FAST”
position.
Push slowly on the clutch engagement lever to engage the
Disengaging the Drive
| Release the clutch engagement lever. | Figure 14. Clutch |
| Allow the clutch engagement lever to return to the | |
| disengaged position. | engagement lever |
WARNING
To avoid excessive clutch wear.
Do not hold the engagement lever in a
7