Rover 5377 - 12HP owner manual Specifications

Page 4

ROVER RANGER

Machine Model No.

5377

Engine Model No.

281707

Single Cylinder

Briggs & Stratton

4 Stroke

12Hp 465cc

Fuel Capacity

4.0 Litres

Oil Capacity

1.42 Litres

Lubrication

Gear Impellor

Spark Plug type

Champion CJ8

Spark Plug gap

0.7 to 0.8mm

Ignition type

Magnetron

Engine Oil

10w-30 or SAE 30

SPECIFICATIONS

To emphasise special information the words WARNING and CAUTION are used.

WARNING: The safety of the user and others involved.

Personal injury may result should this information be disregarded.

CAUTION: Follow these instructions carefully to avoid mower damage and loss of warranty.

TRANSMISSION

Auto-Drive system consists of a continuous belt being driven by an idler pulley over two drive pulleys and around a return pulley. Friction plates are brought into contact with the drive pulleys to impart either forward or reverse motion to rear drive wheels by means of a drive selector pedal on the right side of the machine.

Ground speed at 3600 rpm is variable due to Auto – Drive system depending on pressure applied to drive selector pedal.

Max. speed = 8.6 km/hr

STEERING WHEEL

325MM Dia. Steering Wheel. 1 ¼ turns lock to lock.

CLUTCH/BRAKE PEDAL

Foot operated pedal. Left side of machine.

PARKING BRAKE KNOB

Hand operated catch. Left hand side. Used in conjunction with clutch/brake pedal.

CUTTING HEAD

Model 160 Full floating pressed steel housing with right side discharge. Width of cut 760 mm (30”).

DRIVE SELECTOR

Foot operated pedal located on right side of machine. Spring loaded so as to return to neutral position.

TYRES

Front Tyres:

4.1 x 6 Tube

 

Pressure 140 KPA maximum

Rear Tyres:

16 x 6.5 x 8 Tubeless

 

Pressure 96 KPA maximum

CONTROLS

Throttle control with Fast, Slow and Choke positions;

Key switch with Off, On and Start positions;

CUTTING HEIGHT

Lever right hand side. 8 height of cut positions from 15mm to 65mm.

CUTTER DRIVE

Lever located left side of seat cowl.

GENERAL

Wheel Base: 135cm

Length:

164cm

Track 63cm. R 69cm F

Width:

80cm

Turning Circle: 5.8m

Height:

95cm

Turning Radius: 2.0m

Weight:

195kg

2

Image 4
Contents Ranger Auto Drive Safety Instructions Safety Features Specifications Setting UP Instructions Loose Parts KITAdjusting the Seat Before OperatingControls Fill Crankcase with OILOperating Instructions OIL Change Maintenance Interval ChartSpark Plug Maintenance Carburetor AdjustmentCooling System Throttle ControlBrake Caliper Adjustment Brake ARM AdjustmentCutting Unit Cutting Unit Removal Wheel RemovalCutter Drive Adjustment PAD ReplacementCutterhead Brake Adjustment Parking BrakeDrive Chain Adjustments Auto DriveContinuous Belt Drive Selector PedalHeight of CUT Adjustment Steering RodsCutter Head Tilt Steering StopsSafety and Instruction Decals Circuit Diagram and Spares DescriptionTrouble Shooting Problem Possible Causes Corrective ActionRanger Auto Drive Spare Parts List DescriptionPage Description Page Description Page Item Part No Page Description Page Description Warranty Conditions