Radio Shack 63-3013 owner manual Preparation, Assembling Detector, Installing Batteries

Page 4
Arm Support

63-3013.fm Page 4 Wednesday, July 26, 2000 9:42 AM

ˆPreparation

ASSEMBLING THE

DETECTOR

Assembling your detector is easy and re- quires no special tools. Just follow these steps.

1. Turn the stem’s lock nut clockwise until it loosens.

2. Lengthen or shorten

Search

the

stem

so when

you

stand

upright

Coil

Knobs

with

the

detector in

 

your hand, the search

 

coil is level with and

Stem

about 1/2 to 2 inches

 

above

the

ground

Lock Nut

with your arm relaxed

at your side.

3. Turn the stem’s lock nut counter-clockwise to lock it in place.

4. Unscrew the knobs on the search coil and remove the knobs and connec- tor. Insert the stem

and align the holes on the search coil bracket and the stem.

Push the connector through the holes, then replace and tighten the knobs.

5.Wind the search coil cable around the stem. Leave enough slack in the cable to let you adjust the search coil when you are hunting on uneven ground.

6.Insert the search coil’s plug into the search coil jack on the detector’s control

housing so the pins on the plug are aligned with the holes in the jack.

Cautions:

The search coil’s plug fits into the connector only one way. Do not force the plug or you could damage it.

To disconnect the search coil’s cable from the detector, grasp the plug and pull it out of the connector. Never pull on the cable.

7.Loosen the knob at the search coil’s end, then adjust the search coil to the desired angle. (The search coil should be parallel with the ground.) Tighten the knob just enough to keep the search coil from rotating or wobbling.

Caution: Do not overtighten the search coil or use tools such as pliers to tighten it.

8.Loosen the knob at the base of the han- dle, insert the arm support, and tighten the knob.

INSTALLING BATTERIES

Your detector requires two 9V alkaline bat- teries (not supplied) for power. For the best performance and longest life, we recom- mend RadioShack alkaline batteries.

Cautions:

Use only fresh batteries of the required size and recommended type.

Do not mix old and new batteries, differ- ent types of batteries (standard, alka- line, or rechargeable), or rechargeable batteries of different capacities.

4

Preparation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 4
Contents Metal Detector Contents Features Treasure HUNTER’S Code of EthicsPreparation Installing BatteriesAssembling Detector Using Headphones Listening SafelyTraffic Safety Quick Look at Your Metal DetectorOperation Testing and Using the DetectorPreparing Detector Outdoor Testing and Use Search Coil Sweeping HintsFINE-TUNING Detector False SignalsAdjusting Sensitivity Adjusting GroundDetection Hints Pinpointing a TargetProblem Suggestion TroubleshootingCare Limited Ninety-Day Warranty Vised of the Possibility of Such Damages