Operation | RedMax CHTZ2460L manual

HTZ2460/HTZ2460L/CHTZ2460/CHTZ2460L

7. Operation

■STARTING ENGINE

pulling the rope, or remove the spark plug and dry it.

OP1

OP2

OP3

OP4

[HTZ2460]

[HTZ2460L]

[CHTZ2460]

[CHTZ2460L]

WARNING

•The cutting head will start moving upon the engine starts.

1.Feed fuel into the fuel tank and tighten the cap securely.

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start moving upon starting of the engine.

3.Push the primer pump several times until overflown fuel flows out in the clear tube. (OP1)

4.When the engine is cool, move the choke lever to the closed position. (OP2)

(1)primer pump

(2)choke lever

(3)close

(4)open

(5)ignition switch

(6)RUN

(7)STOP

(8)throttle lever

5.Set the ignition switch to the “RUN” position. Release the throttle lever and make sure it is fully back. (OP3)

6.While holding the unit firmly, pull out the starter rope quickly until engine fires. (OP4)

IMPORTANT

•Avoid pulling the rope to its end or returning it by releasing the knob. Such actions can cause starter failures.

7.Move the choke lever to the open position. And pull out the starter rope quickly to restart engine.

8.Allow the engine to warm up for a several minutes before starting opertion.

NOTE

1.When restarting the engine immediately after stopping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat

OP5

OP6

■STOPPING ENGINE (OP3)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the “STOP” position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

NOTE

•If the engine won't stop when setting the ignition switch to the stop position, close the choke lever and stop the engine.

In this case, please repair the machine at your nearest servicing dealer.

■RUNNING IN THE ENGINE

IMPORTANT

•During the first 20 working hours, do not use the hedge-trimmer at maximum power for long periods.

■ADJUSTING IDLING SPEED

•Before adjusting the carburetor, clean the air filter and warm up the engine. (OP5)

(1) air filter

•Idle screw is adjusted in order to ensure a good safety margin between idle running and clutch engagement. (OP6)

(1) Idle screw

WARNING

•With the engine idling (3000 rpm), the blade should not move. We recommend that you have the dealer or an authorised mechanic carry out any carburetor adjustments.

WARNING

•Weather conditions and altitude may effect carburation.

US-10

CHTZ2460, CHTZ2460L, HTZ2460L, HTZ2460 specifications

The RedMax CHTZ2460 series is a thrilling lineup of professional-grade trimmers designed for efficiency and performance. This series includes the CHTZ2460, HTZ2460, HTZ2460L, and CHTZ2460L models, each tailored to meet the diverse needs of landscaping professionals and garden enthusiasts alike.

One of the standout features across the CHTZ2460 series is the powerful engine. Each model is equipped with a high-performance, 24.5cc two-stroke engine that delivers robust power while maintaining fuel efficiency. This allows users to tackle dense grass and tough weeds effortlessly, making it an ideal choice for larger properties and commercial jobs.

In addition to engine power, the ergonomic design of these trimmers significantly enhances user experience. The lightweight construction mitigates fatigue during prolonged use, while the adjustable handlebars allow for customizable comfort settings. This ergonomic approach ensures that operators can maintain precision in their work without compromising on their comfort.

The CHTZ2460 series also integrates advanced technologies aimed at optimizing performance. The models feature an efficient air filtration system that prolongs engine life by keeping dust and debris at bay. This technology not only enhances performance but also reduces maintenance time, allowing users to focus more on their work.

Another notable characteristic is the ease of operation. The CHTZ2460, HTZ2460, HTZ2460L, and CHTZ2460L models include a simple starting system, making them user-friendly for both seasoned professionals and newcomers. The easy-to-access throttle and trigger controls permit smooth operation, enhancing overall efficiency during trimming tasks.

Moreover, the trimmers come with a variety of cutting attachments, providing versatility for different applications. Whether you need a standard trimmer head for grass or specialized attachments for tougher brush, the CHTZ2460 series accommodates various landscape requirements.

Durability is also a crucial element of the RedMax CHTZ2460 series. Built with high-quality materials, these trimmers are designed to withstand harsh working conditions. This rugged construction ensures longevity and reliability, making them a wise investment for anyone in the landscaping business.

In summary, the RedMax CHTZ2460, HTZ2460, HTZ2460L, and CHTZ2460L models are engineered to offer powerful performance, ergonomic design, advanced technology, and remarkable durability. Whether for commercial landscaping or residential yard maintenance, this series of trimmers is an exceptional choice for any enthusiast seeking both efficiency and effectiveness.