RedMax CHTZ2460L manual Starting the Engine, If Someone Comes, Maintenance, Using the Product

Page 6

HTZ2460/HTZ2460L/CHTZ2460/CHTZ2460L

5. For safe operation

care should also be taken to constantly look around or otherwise check for the presence and locations of other people working so as to maintain a distance between each person sufficient to ensure safety.

2.Check the condition of working area to avoid any accident by hitting hidden obstacles such as stumps, stones, cans, or broken glass.

IMPORTANT

Remove any obstacle before beginning work.

3.Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the cutting attachment is properly installed and securely fastened.

■STARTING THE ENGINE

1.Keep bystanders especially children, and animals at least 15 m (50 ft) away from the operating point. If you are approached, immediately stop the engine.

2.The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to move as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts.

WARNING

•Never place the throttle into the high- speed position when starting the engine.

•Never start the engine at the cutting attachment side.

3.After starting the engine, check to make sure that the cutting attachment stops moving when the throttle is moved fully back to its original position. If it continues to move even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized RedMax servicing dealer for repair.

manufacturer. And use only for tasks explained in the manual.

1.Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

2.Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the level necessary.

3.If the unit starts to shake or vibrate, turn off the engine and check the whole unit. Do not use it until the trouble has been properly corrected.

4.Keep all parts of your body away from moving cutting attachment and hot surfaces.

5.Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or immediately after shutting down the engine. Doing so could result in serious burns or electrical shock.

6.While operating the machine be always sure of a safe and secure operating position especially when using steps or a ladder.

• IF SOMEONE COMES

1.Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

■MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the engine before performing any maintenance, checking procedures or working on the machine.

(1) Check ok!

■USING THE PRODUCT

IMPORTANT

Cut only materials recommended by the

US-6

WARNING

The metallic parts reach high temperatures immediately after stopping the engine.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CHTZ2460L Contents Model HTZ2460 HTZ2460L CHTZ2460 SpecificationsParts location CHTZ2460LEmission Control Symbols on the machinePosition ManufacturedWorking Condition For safe operationWorking Plan Working CircumstanceStarting the Engine MaintenanceUsing the Product If Someone ComesHandling Fuel Refill after cooling the engineTransportation Fuel WarrantyFuel Gasoline RequirementsHOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OIL For Your Engine LIFE, AvoidFueling the Unit Operation HOW to USE OP7OP8 OP9 Maintenance Blades Safety Lock MA8MA5 MA8MA13 Chtz Procedures to be Performed After Every 100 Hours of USEMuffler Spark ArresterTroubleshooting guide StorageDisposal Warranty Commencement Date Manufacturers Warranty CoverageOwners Warranty Responsibilities What is CoveredHOW to File a Claim Emission Warranty Parts ListWhat is not Covered Where to GET Warranty Service

CHTZ2460, CHTZ2460L, HTZ2460L, HTZ2460 specifications

The RedMax CHTZ2460 series is a thrilling lineup of professional-grade trimmers designed for efficiency and performance. This series includes the CHTZ2460, HTZ2460, HTZ2460L, and CHTZ2460L models, each tailored to meet the diverse needs of landscaping professionals and garden enthusiasts alike.

One of the standout features across the CHTZ2460 series is the powerful engine. Each model is equipped with a high-performance, 24.5cc two-stroke engine that delivers robust power while maintaining fuel efficiency. This allows users to tackle dense grass and tough weeds effortlessly, making it an ideal choice for larger properties and commercial jobs.

In addition to engine power, the ergonomic design of these trimmers significantly enhances user experience. The lightweight construction mitigates fatigue during prolonged use, while the adjustable handlebars allow for customizable comfort settings. This ergonomic approach ensures that operators can maintain precision in their work without compromising on their comfort.

The CHTZ2460 series also integrates advanced technologies aimed at optimizing performance. The models feature an efficient air filtration system that prolongs engine life by keeping dust and debris at bay. This technology not only enhances performance but also reduces maintenance time, allowing users to focus more on their work.

Another notable characteristic is the ease of operation. The CHTZ2460, HTZ2460, HTZ2460L, and CHTZ2460L models include a simple starting system, making them user-friendly for both seasoned professionals and newcomers. The easy-to-access throttle and trigger controls permit smooth operation, enhancing overall efficiency during trimming tasks.

Moreover, the trimmers come with a variety of cutting attachments, providing versatility for different applications. Whether you need a standard trimmer head for grass or specialized attachments for tougher brush, the CHTZ2460 series accommodates various landscape requirements.

Durability is also a crucial element of the RedMax CHTZ2460 series. Built with high-quality materials, these trimmers are designed to withstand harsh working conditions. This rugged construction ensures longevity and reliability, making them a wise investment for anyone in the landscaping business.

In summary, the RedMax CHTZ2460, HTZ2460, HTZ2460L, and CHTZ2460L models are engineered to offer powerful performance, ergonomic design, advanced technology, and remarkable durability. Whether for commercial landscaping or residential yard maintenance, this series of trimmers is an exceptional choice for any enthusiast seeking both efficiency and effectiveness.
Top Page Image Contents