RedMax HEZ3060S, HEZ2460S manual MA6 Blade MA6, Intake AIR Cooling Vent, MA8, MA9, Protector

Page 16

HEZ2460S/HEZ3060S

9. Maintenance

MA6

 

 

(5)

(2)

(4)

 

(1)

(3)

■BLADE (MA6)

•Place the blade between holders (A) and (B) while locking the gear shaft by putting the bar, through the key holes on the holder (A) and the gearcase. Use the socket to tighten the blade mounting bolt.

(1)Blade mounting bolt (Left-handed) Tightning Torque:

130~150 in-lbs (15~20 N.m)

(2)Holder (B)

(3)Blade

(4)Holder (A)

(5)Bar

IMPORTANT

•Attention to the direction of the holder

(B)

■INTAKE AIR COOLING VENT

MA7 (1)

(2)

MA8

(2)

(1)

MA9

vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the machine. (MA7)

(1)cylinder

(2)intake air cooling vent (back)

■PROTECTOR

•When you replace protector, use new bolt (T3207-24130). (MA8)

Tightning Torque:

35~52in-lbs (4.0~6.0N.m.)

■PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE

WARNING

•Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

•When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the machine. Failing to do so could cause the muffler to become overheated, and that this in turn could cause the engine to catch on fire. Always make sure that the muffler is clean and free of wood chips, leaves, and other waste before use.

•Check the intake air cooling vent and the area around the cylinder cooling fins after every 25 hours of use for blockage, and remove any waste which has attached itself to the machine. Note that it is necessary to remove the engine cover shown in (MA7) in order to be able to view the upper part of the cylinder.

IMPORTANT

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time.

2.Tighten all screws, bolts, and fittings.

3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has wipe it away using oil-free, lead-free gasoline.

•If waste gets stuck and causes blockage around the intake air cooling

US-16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents HEZ2460S HEZ3060S Contents Specifications Parts locationEmission Control Symbols on the machineManufactured For safe operation Before use Using the productStarting the engine Fuel safety MaintenanceTransport StorageDisposal Set up Mounting Other Parts SE1Screw Clamp bolt Tightning Torque 70~130 in-lb 8~15 N.m SE2Warranty FuelFuel Gasoline RequirementsFor Your Engine LIFE, Avoid HOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OILFueling the Unit Operation OP8 HOW to USE Adjusting Throttle CableAdjusting Idling Speed OP7 Stopping Engine OP4Maintenance Maintenance ChartMA1 AIR Filter MufflerMA4 Spark ArresterProcedures to be Performed After Every 100 Hours of USE MA6 Blade MA6Intake AIR Cooling Vent MA8Troubleshooting guide StorageDisposal Case 1. Starting failureManufacturers Warranty Coverage Owners Warranty ResponsibilitiesWarranty Commencement Date What is CoveredEmission Warranty Parts List What is not CoveredHOW to File a Claim Where to GET Warranty Service

HEZ2460S, HEZ3060S specifications

The RedMax HEZ2460S and HEZ3060S are two powerful and efficient handheld blowers designed for professional use. RedMax, a brand known for its high-quality outdoor power equipment, has equipped these models with advanced features and technologies that enhance performance, durability, and user comfort.

The HEZ2460S and HEZ3060S are both powered by low-emission engines that comply with stringent environmental regulations. This ensures that users can operate these blowers with minimal impact on the environment while still benefiting from robust performance. The HEZ2460S features a 24.5cc engine, while the HEZ3060S is equipped with a more powerful 30.5cc engine, providing users with options depending on their specific power needs.

One of the standout characteristics of these models is their ergonomic design. The blowers are crafted to reduce operator fatigue, allowing for extended use without discomfort. This is particularly important for professionals who need to use these tools for long periods. The well-balanced structure ensures that weight is distributed evenly, and the adjustable shoulder straps further enhance user comfort.

Both models utilize RedMax's advanced airflow technology, which maximizes blowing efficiency. This technology allows users to move large volumes of debris with ease, making yard clean-up and maintenance quicker and more effective. The HEZ3060S, with its larger engine, is particularly adept at handling tougher tasks, such as clearing wet leaves or heavy debris.

Additionally, the HEZ2460S and HEZ3060S are equipped with a cruise control feature, enabling users to maintain a steady flow of air without continuous throttle input. This not only simplifies operation but also enhances fuel efficiency, allowing users to get more work done with less fuel consumption.

Maintenance is also made simpler with both models, which feature easy-access air filters and spark plugs. This reduces downtime and ensures that users can perform routine maintenance with minimal hassle, prolonging the life and performance of the equipment.

In summary, the RedMax HEZ2460S and HEZ3060S handheld blowers are high-performance tools that combine power, comfort, and efficiency. With low-emission engines, ergonomic designs, advanced airflow technology, and user-friendly features, they are ideal for professionals needing reliable equipment for yard maintenance and cleanup tasks. Their durability and ease of use make them a valuable addition to any landscape maintenance arsenal.
Top Page Image Contents