Bypass, Phantom Power Button and LED

Section 2

Operating Controls

286s

of the mic signal and additional gain exceeds the circuit’s capabilities; reduce gain via the MIC GAIN control. Set the MIC GAIN control so that the CLIP LED never lights.

The LEVEL LEDs can also be used to check the strength of the input signal. For example, the 286s does not support low level microphones plugged into its 1/4” INPUT jack; in this case, the LEVEL LEDs would not light, because the signal is too low.

PHANTOM POWER Button and LED

When you use phantom powered mics with your 286s, press the PHANTOM POWER button In to activate the 286s phantom power, providing +48VDC to the microphone through its connecting cable. This industry-standard configuration supports virtually all currently-manu- factured phantom power mics. If you do encounter problems, it will typically be with an older mic. Note that some mics may take several seconds to fully power up when phantom power is applied. If you are using mics that do not require phantom power, press the button so that it is in the Out position.

Note: Always plug in a condenser mic with PHANTOM POWER Off and gain levels down.

Then switch the PHANTOM POWER On and adjust the gain as needed.

The yellow PHANTOM POWER LED lights when the PHANTOM POWER button is in.

80 Hz HIGHPASS Button and LED

Press this button In to activate the 286s pre-processing third order filter. The HIGHPASS function filters out frequencies below 80Hz by 18dB/octave before any compression, de-essing, etc., is applied to input signal. This is most effective for reducing hum, rumble, wind and other low frequency problems. The HIGHPASS filter is also before any external processing provided via the rear panel INSERT jack.

The HIGHPASS LED lights when the HIGHPASS button is In.

Bypass

PROCESS BYPASS Button and LED

Press this button In to bypass the 286s Compressor, De-Esser, Enhancer, and Expander/Gate processing circuitry and the OUTPUT GAIN control (as well as any processing provided by external processors via the rear panel INSERT jack). In Bypass mode, the 286s will apply gain and filtering as set with Mic Preamp Section controls. BYPASS is equivalent to setting the Compressor DRIVE, De-Esser THRESHOLD, Enchancer LF and HF DETAIL and Expander/ Gate THRESHOLD controls to OFF, the OUTPUT GAIN control to 0dB (12:00 position), and not connecting any external processing to the rear panel INSERT jack. Bypass is especially useful for making comparisons between processed and unprocessed signals.

The red PROCESS BYPASS LED lights when the PROCESS BYPASS button is pressed In.

Note: The Compressor is Off when the DRIVE is set to OFF.

286 specifications

The Harman 286 is a significant advancement in the realm of audio technology, combining high-quality sound reproduction with innovative features tailored for both personal and professional use. Designed for audiophiles and casual listeners alike, the Harman 286 stands out due to its rich array of functionalities and elegant design.

At the heart of the Harman 286 is its advanced audio processing technology. It utilizes state-of-the-art digital signal processing (DSP) to deliver exceptional sound quality, ensuring that every note is crisp and clear. This high-resolution audio capability supports various formats, allowing users to enjoy music exactly as the artist intended. Additionally, the model features a robust, built-in amplifier that provides ample power while minimizing distortion, resulting in a dynamic listening experience.

One of the standout features of the Harman 286 is its wireless connectivity capabilities. Equipped with Bluetooth 5.0 technology, it facilitates seamless pairing with smartphones, tablets, and other compatible devices. This allows users to stream their favorite songs without the hassle of wires, enhancing convenience and portability. Furthermore, the Harman 286 supports various streaming services, providing users with access to a vast library of music at their fingertips.

The design of the Harman 286 reflects a modern aesthetic, making it a stylish addition to any space. With its sleek lines and premium materials, it not only sounds good but looks good too. The user-friendly control interface enables easy navigation through various settings and features, allowing users to customize their audio experience.

Another hallmark of the Harman 286 is its impressive battery life. Engineered for longevity, this model can provide several hours of continuous playback, making it ideal for both home use and on-the-go listening. When the battery does run low, the quick charge feature ensures minimal downtime, allowing users to get back to enjoying their music quickly.

In summary, the Harman 286 embodies a blend of cutting-edge technology, user-friendly features, and contemporary design. With its superior sound quality, versatile connectivity options, and long battery life, it remains a top choice for anyone seeking an exceptional audio experience. Whether for personal use or professional settings, the Harman 286 is a reliable companion for music lovers everywhere.