RedMax HE2200LDC, BC2200E manual Line Head Usage HOW to USE Waring, Trimming Grass and Weeds,  6 

Page 8

OPERATION

■LINE HEAD USAGE

• HOW TO USE WARING!!!

1.Always wear eye protection such as safety goggles. Never lean over the rotating cutting head. Rocks or other debris could be thrown into eyes and face and cause serious personal Injury.

2.Keep the debris guard attached in place at all times when the unit is operated.

• TRIMMING GRASS AND WEEDS

Always remember that the TIP of the line does cutting. You will achieve better results by not crowding the line into the cutting area. Allow the unit to trim at its own pace.

1.Hold the unit so the cutting head is off the ground and tilted about 30 degrees toward the sweep direction.

2.Use full throttle when cutting.

3.You can avoid thrown debris by sweeping in the correct direction, I.e., from your right to the left for BT2200LDC & BC2200E, and from your left to the right for BC2200LDC.

4.Use a slow, deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will require slower action than will light growth.

5.Never swing the unit too hard because you may lose your balance or control of the unit.

6.Try to control the cutting motion with the hip rather than placing the full workload on the arms and hands.

7.Take precautions to avoid wire, grass and dead, dry, long-stem weeds from wrapping around the cutting head shaft. Such materials can stall the cutting head and cause the clutch to slip, resulting in damage to the clutch system, if repeated frequently.

• ADJUSTING LINE LENGTH

Your trimmer is equipped with a bump head that allows the operator to advance the line without stopping the engine. When the line becomes short, lightly tap the head on the ground while running the engine at full throttle. Each time the head is bumped, the line advances about 1 inch (25.4 mm). For best results, tap the head on bare ground or hard soil. If line release is attempted in tall grass, the engine may stall.

NOTE :

Always keep the trimming line fully extended. Line release becomes difficult as the cutting line becomes shorter.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents OWNER/OPERATOR Manual 5850-93110Page Contents For Safe Operation  2 Setup Adjusting Handle PositionHE2200LDC  3 Fuel  4 Adjusting Idling Speed OperationStarting Engine Stopping EngineLine Head Usage HOW to USE Waring Adjusting Line LengthTrimming Grass and Weeds  6 Metal Blade Usage For Safe Operation on a SlopeControlling Blade Bounce What causes blade bounce 8  How you can maintain the best controlTo Sharpen Blade Maintenance Replacing Trimming LineRewinding the Existing Spool Disassembling the Head Winding NEW LineInstalling the Reel Installing a Prewound ReelBling the Head Reel 11  AIR Filter Fuel FilterSpark Plug StorageBC2200LDC SpecficationsBT2200LDC Parts List  14 Trimmer Unit for BC2200E  15 Trimmer Unit for BC2200LDC  16 Stick Edger Unit for HE2200LDC  17 Engine Group for BT2200LDC. BC2200E. BC2200LDC. HE2200LDC  18 Engine Group for BT2200LDC. BC2200E. BC2200LDC.HE2200LDC  19 Manufacturers Warranty Coverage Year Limited Warranty Komatsu Zenoah America INC

BC2200LDC, BT2200LDC, BC2200E, HE2200LDC specifications

RedMax, a recognized leader in outdoor power equipment, offers a variety of innovative tools designed for both professional landscapers and homeowners. Among its standout offerings are the HE2200LDC, BC2200E, BT2200LDC, and BC2200LDC models, each equipped with impressive features and technologies to meet diverse landscaping needs.

The RedMax HE2200LDC is a high-performance hedge trimmer that stands out with its long reach and lightweight design. It is equipped with a powerful 21.7 cc engine that ensures efficient cutting while minimizing operator fatigue. The dual-action blades provide a smooth and precise cut, making it ideal for shaping and maintaining hedges. Additionally, the HE2200LDC features a 180-degree rotating rear handle, which enhances maneuverability and comfort when trimming in various positions.

The BC2200E is an exceptional brush cutter that demonstrates RedMax's commitment to power and durability. Featuring a robust 21.7 cc engine, it delivers remarkable cutting performance. The ergonomic design includes a harness and anti-vibration technology, which allows for extended use without discomfort. The BC2200E is compatible with a variety of cutting attachments, making it versatile for tackling tough brush, weeds, and overgrowth.

Another impressive model is the BT2200LDC, a powerful pole saw designed for reaching high branches and tricky areas. This model is equipped with a strong, efficient engine and a high-quality cutting bar, enabling users to make clean cuts at heights up to 12 feet. The lightweight and well-balanced design ensures that users can operate the saw with ease and precision. Its easy starting system allows users to get to work quickly and efficiently.

Finally, the BC2200LDC is a line trimmer that combines performance with user-friendly features. This model boasts a robust 21.7 cc engine and a bump feed line head, allowing for quick line advancement during operation. The low vibration system enhances comfort, making it easier to use for extended periods. Its durable construction ensures that it can withstand the rigors of frequent use in various environments.

In summary, RedMax’s HE2200LDC, BC2200E, BT2200LDC, and BC2200LDC models offer a range of features and technologies aimed at enhancing productivity and ease of use. With powerful engines, ergonomic designs, and versatile options, these tools are well-suited for both professional landscapers and gardening enthusiasts alike, setting a standard for performance and reliability in outdoor power equipment.
Top Page Image Contents