RedMax CHT2200 manual Maintenance

Page 17

Maintenance

Maintenance, replacement, or repair of the emission control device and systems may be performed by any non-road engine repair establishment or individual.

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the hedge-trimmer. Contact with moving cutting head or hot muffler may result in a personal injury.

■DAILY INSPECTION

•Check all the fasteners for loose or missing ones.

•Brush off dirt on the blades and apply a light coating of oil.

NOTE

•The blades are loose-installed to the guide bar with several screws and nuts. Do not tighten up those screws, or the blades will be locked and result in clutch failures. Allow the screws a half spare turn, and secure there with the nut(See NOTE on page 8).

■GEAR CASE

•At every 15 hours of use, supply grease to the gear case. Pump in grease via the grease fitting until it comes out of the root of blades.

GREASE FITTING

■AIR FILTER

•The air filter, if clogged, will reduce the engine performance. Monthly check and clean the filter element in warm, soapy water as required. Dry completely before installing. If the element is broken or shrunk, replace with a new one.

■FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.

■SPARK PLUG

•Starting failure and mis-firing are often caused by a fouled spark plug. Periodically clean the spark plug and check that the spark gap is in the correct range. For a replacement plug, use the correct type specified by RedMax(See SPECIFI- CATIONS on the page 15).

•REPLACEMENT PLUG IS A CHAMPION RCJ6Y OR THE EQUIVALENT, SUCH AS BOSCH WR8E OR NGK BR6S.

IMPORTANT

•Note that using any spark plugs other than those designated may result in the engine failing to operate properly or in the engine becoming overheated and damaged.

•To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents HT2200 CHT2200 Safety First Contents  4  Safety PrecautionsWork Gear and Clothing Things to Check Before Starting UP the Engine Things to Check Before Using Your HEDGE-TRIMMERAvoid Noise Problem Things to be Careful about When Using Your HEDGE-TRIMMER  8  HT2200 Parts Location & SpecificationsImportant Engine Information Emission Control LabelSet up  12  Recommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel For Your Engine LIFE, Avoid Fueling the UnitStarting Engine Warning OperationStopping Engine Adjusting Idling SpeedHOW to USE Maintenance Intake AIR Cooling Vent Warning MufflerSpark Arrester Procedures to be Performed After Every 100 Hours of USE Storage Parts List  22   23   24   25   26   27   28   29  Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC

HT2200, CHT2200 specifications

The RedMax CHT2200 and HT2200 are powerful and efficient handheld tools designed specifically for professionals in the landscaping and gardening industries. These two models are celebrated for their versatility, reliability, and performance making them ideal for various tasks ranging from trimming and pruning to clearing and edging.

One of the standout features of the RedMax CHT2200 is its robust engine. Powered by a high-performance 22.5cc engine, this model offers exceptional power and torque, enabling users to tackle tough vegetation with ease. The engine's design combines high efficiency with lower emissions, contributing to environmental sustainability while still providing the muscle needed for demanding tasks.

The HT2200, on the other hand, is engineered for hedge trimming and boasts a dual-sided blade. This feature allows for quicker and more efficient cutting, ensuring a clean and professional finish. The blades are crafted from high-quality steel, providing both durability and sharpness. Users appreciate the lightweight construction of both models, which significantly reduces fatigue during extended usage, a crucial factor for landscape professionals.

In terms of technology, both models are equipped with advanced anti-vibration systems. This innovation minimizes vibrations transferred to the user's hands, enhancing comfort and safety during operation. This feature is particularly beneficial for those who use these tools for prolonged periods, helping to prevent fatigue and potential injuries.

Another important characteristic is the ease of maintenance offered by the RedMax CHT2200 and HT2200. Designed with user convenience in mind, these tools come with easy-access air filters and spark plugs, simplifying routine maintenance tasks. This design feature significantly reduces downtime, maximizing productivity for professionals.

Safety features are also a key component of both models. They are built with ergonomic handles that ensure a secure grip and precise control. Users can work confidently, knowing that they have a reliable tool that emphasizes their safety.

Overall, the RedMax CHT2200 and HT2200 represent a blend of power, efficiency, and user-friendly design, making them indispensable tools for any landscaping professional looking to achieve outstanding results. Whether tackling thick hedges or maintaining detailed garden edges, these RedMax models deliver performance that is hard to beat.
Top Page Image Contents