RedMax CHT2200 manual Procedures to be Performed After Every 100 Hours of USE

Page 19

Maintenance

■PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent at the same time.

2.Tighten all screws, bolts, and fittings.

3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has wipe it away using oil-free, lead-free gasoline.

19 

Image 19

Contents

HT2200 CHT2200 Safety First Contents  4  Safety PrecautionsWork Gear and Clothing Avoid Noise Problem Things to Check Before Using Your HEDGE-TRIMMERThings to Check Before Starting UP the Engine Things to be Careful about When Using Your HEDGE-TRIMMER  8  HT2200 Parts Location & SpecificationsImportant Engine Information Emission Control LabelSet up  12  Fuel HOW to MIX FuelRecommended Mixing Ratio Gasoline 50OIL For Your Engine LIFE, Avoid Fueling the UnitStarting Engine Warning OperationHOW to USE Adjusting Idling SpeedStopping Engine Maintenance Spark Arrester MufflerIntake AIR Cooling Vent Warning Procedures to be Performed After Every 100 Hours of USE Storage Parts List  22   23   24   25   26   27   28   29  Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC