RedMax RMSZ2500 manual Operation, OP1, OP21, OP3 OP4 Starting Engine

Page 18

8. Operation

OP1

OP2(1)

(2)

(3)

OP3

(5)

(6)

(4)

(7)

OP4

■STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine.

2.Push the primer pump several times until overflown fuel flows out in the clear tube. (OP1)

3.Move the choke lever to the closed position. (OP2)

4.Set the ignition switch to the “start” position. While pulling the throttle lever, push the set button, and release the throttle, then the throttle lever is in to the “start” position. (OP3)

5.While holding the unit firmly, pull out the starter rope quickly until engine fires. (OP4)

(1)Choke lever (2) Close (3) Open

(4)Ignition Switch (5) Start (6) Stop

(7)Throttle Set Button

IMPORTANT

•Avoid pulling the rope to its end or returning it by releasing the knob. Such actions can cause starter failures.

6.Move the choke lever downward to open the choke. And restart engine. (OP2)

7.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stopping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents RMSZ2500 RMS9-99101003Page Safety First ContentsParts location Specifications RMSZ2500Avertissement Symbols on the machine Important Engine InformationFor safe operation Working ConditionWorking Circumstance Working Plan Before Starting the Engine Starting the EngineUsing the Product Use only for tasks explained in the manualMaintenance If Someone ComesHandling Fuel Transportation Set up SE4 Sweeper Assembly SE4 Clevis Pin Hitch Pin Cotter Pin Drum Axle Drum AssemblyHOW to MIX Fuel FuelRecommended Mixing Ratio Gasoline 50OIL Fueling the Unit For Your Engine LIFE, AvoidOP21 OperationOP1 OP3 OP4 Starting EngineOP5 Adjusting Throttle CableAdjusting Idling Speed OP6 OP6 OP7 Stopping Engine OP3OP8 OP9 Direction of rotationMaintain a shallow angle to the work surface Operating and Safety Tips OP11OP10 OP11 YOU Must Always Guard Against Thrown DebrisLoad General Safety InstructionsNever make unauthorized attachment installations Stay Alert Avoid low rpm operationMaintenance Maintenance ChartGearcase Lubrication MA1 End cap Main gearAIR Filter Replacement Plug is a NGK CMR7AMA2 MA3 MA4 Fuel FilterSpark Arrester MA5Muffler Spark ArresterMA7 Procedures to be Performed After Every 100 Hours of USEMA61 Cylinder Intake Air Cooling Vent backTroubleshooting guide StorageCheck Probable Causes Action Parts list RMSZ2500  31   32   33  Manufacturer’s warranty coverage Model RMSZ2500 Year Limited Warranty RedMax SweeperRedMax Sweeper Modèle RMSZ2500 Garantie limitée à 2 ans Limites de la garantie

RMSZ2500 specifications

The RedMax RMSZ2500 is a powerful and efficient backpack blower designed for professionals in landscaping and maintenance. As part of RedMax's robust lineup of outdoor power equipment, it stands out for its impressive combination of performance, comfort, and ease of use.

One of the key features of the RMSZ2500 is its powerful engine. Equipped with a high-performance 25.4cc engine, this blower delivers an air speed of up to 195 miles per hour and an air volume rating of 660 cubic feet per minute. This impressive output allows users to easily clear leaves, debris, and grass clippings from lawns and garden areas, making it ideal for both residential and commercial use.

The RMSZ2500 also incorporates advanced technologies that enhance its performance and user experience. One of the standout technologies is the X-Torque engine, which is designed to reduce harmful emissions and improve fuel efficiency. This means that users can operate the blower for longer periods without frequent refueling and with less impact on the environment. Supporting this is the company's Easy Start system, which makes starting the engine smoother and requires less effort, significantly reducing user fatigue during operation.

Comfort is paramount in the design of the RedMax RMSZ2500. The backpack frame is ergonomically designed, featuring adjustable shoulder straps and a padded backrest. This ensures that users can operate the blower for extended periods without discomfort. Additionally, the lightweight design helps minimize strain, allowing for greater maneuverability and ease of use in any landscaping task.

Durability and reliability are also important characteristics of the RMSZ2500. Built with a sturdy construction that can withstand the rigors of everyday use, this blower is engineered for longevity. The easy-access air filter simplifies maintenance, ensuring optimal performance over time.

In summary, the RedMax RMSZ2500 backpack blower combines a powerful engine, innovative technologies, and user-friendly design. Its X-Torque engine enhances fuel efficiency while reducing emissions, and the Easy Start system minimizes startup effort. With a focus on comfort and durability, the RMSZ2500 is an excellent choice for professionals seeking a reliable and efficient blower to tackle a variety of outdoor tasks.
Top Page Image Contents