RedMax RMSZ2500 OP5, OP6 OP7 Stopping Engine OP3, Adjusting Throttle Cable, BREAK-IN Operation

Page 19

8. Operation

OP5

.04 in

(1~2mm) (1)

OP6

(1)

OP7

■STOPPING ENGINE (OP3)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the STOP position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

■ADJUSTING THROTTLE CABLE

•The normal play is 1 or 2mm when measured at the carburetor side end. Readjust with the cable adjuster as required. (OP5)

(1) Cable Adjuster

■ADJUSTING IDLING SPEED (OP6)

1.When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

(1) Idle Adjusting Screw

NOTE

•Warm up the engine before adjusting the idling speed.

■BREAK-IN OPERATION

The Properly Dressed Operator (OP7)

(1)ALWAYS wear hearing protective devices.

(2)ALWAYS wear eye protection such as goggles or safety glasses.

(3)ALWAYS wear a mask to protect against dust or other airborne particles.

(4)ALWAYS wear close fitting clothes. Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry that could get caught in machinery.

(5)ALWAYS wear leather or heavy-rubber shoes. NEVER work barefooted!

(6)BEWARE of thrown debris!

(7)DIRECTION OF ROTATION

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RMS9-99101003 RMSZ2500Page Contents Safety FirstParts location RMSZ2500 SpecificationsAvertissement Important Engine Information Symbols on the machineWorking Condition For safe operationWorking Circumstance Working Plan Starting the Engine Before Starting the EngineUse only for tasks explained in the manual Using the ProductIf Someone Comes MaintenanceHandling Fuel Transportation Set up Clevis Pin Hitch Pin Cotter Pin Drum Axle Drum Assembly SE4 Sweeper Assembly SE4Fuel HOW to MIX FuelRecommended Mixing Ratio Gasoline 50OIL For Your Engine LIFE, Avoid Fueling the UnitOP3 OP4 Starting Engine OperationOP1 OP21OP6 OP7 Stopping Engine OP3 Adjusting Throttle CableAdjusting Idling Speed OP6 OP5Direction of rotation OP8 OP9YOU Must Always Guard Against Thrown Debris Operating and Safety Tips OP11OP10 OP11 Maintain a shallow angle to the work surfaceAvoid low rpm operation General Safety InstructionsNever make unauthorized attachment installations Stay Alert LoadMaintenance Chart MaintenanceGearcase Lubrication End cap Main gear MA1Fuel Filter Replacement Plug is a NGK CMR7AMA2 MA3 MA4 AIR FilterSpark Arrester MA5Muffler Spark ArresterCylinder Intake Air Cooling Vent back Procedures to be Performed After Every 100 Hours of USEMA61 MA7Storage Troubleshooting guideCheck Probable Causes Action Parts list RMSZ2500  31   32   33  Manufacturer’s warranty coverage RedMax Sweeper Model RMSZ2500 Year Limited WarrantyLimites de la garantie RedMax Sweeper Modèle RMSZ2500 Garantie limitée à 2 ans

RMSZ2500 specifications

The RedMax RMSZ2500 is a powerful and efficient backpack blower designed for professionals in landscaping and maintenance. As part of RedMax's robust lineup of outdoor power equipment, it stands out for its impressive combination of performance, comfort, and ease of use.

One of the key features of the RMSZ2500 is its powerful engine. Equipped with a high-performance 25.4cc engine, this blower delivers an air speed of up to 195 miles per hour and an air volume rating of 660 cubic feet per minute. This impressive output allows users to easily clear leaves, debris, and grass clippings from lawns and garden areas, making it ideal for both residential and commercial use.

The RMSZ2500 also incorporates advanced technologies that enhance its performance and user experience. One of the standout technologies is the X-Torque engine, which is designed to reduce harmful emissions and improve fuel efficiency. This means that users can operate the blower for longer periods without frequent refueling and with less impact on the environment. Supporting this is the company's Easy Start system, which makes starting the engine smoother and requires less effort, significantly reducing user fatigue during operation.

Comfort is paramount in the design of the RedMax RMSZ2500. The backpack frame is ergonomically designed, featuring adjustable shoulder straps and a padded backrest. This ensures that users can operate the blower for extended periods without discomfort. Additionally, the lightweight design helps minimize strain, allowing for greater maneuverability and ease of use in any landscaping task.

Durability and reliability are also important characteristics of the RMSZ2500. Built with a sturdy construction that can withstand the rigors of everyday use, this blower is engineered for longevity. The easy-access air filter simplifies maintenance, ensuring optimal performance over time.

In summary, the RedMax RMSZ2500 backpack blower combines a powerful engine, innovative technologies, and user-friendly design. Its X-Torque engine enhances fuel efficiency while reducing emissions, and the Easy Start system minimizes startup effort. With a focus on comfort and durability, the RMSZ2500 is an excellent choice for professionals seeking a reliable and efficient blower to tackle a variety of outdoor tasks.
Top Page Image Contents