RedMax BC2300DL manual  13 , Stopping Engine, Adjusting Idling Speed, Line Head Usage Warning

Page 13

Operation

WARNING

•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts.

NOTE

•Avoid pulling the rope to its end or returning it by releasing the knob. Such actions can cause starter failures.

6.When the engine has started, move the choke lever gradually downward to open the choke.

7.Allow the engine to warm up for a half minute before starting operation.

NOTE

1.When restarting the engine immediately after stopping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

■STOPPING ENGINE

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the STOP position.

NOTE

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

■ADJUSTING IDLING SPEED

1.When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

NOTE

•Warm up the engine before adjusting the idling speed.

■LINE HEAD USAGE WARNING

1.Always wear eye protection such as safety goggles. Never lean over the rotating cutting head. Rocks or other debris could be thrown into eyes and face and cause serious personal injury.

2. Keep the debris guard attached in place at all times when the unit is operated.

TRIMMING GRASS AND WEEDS

•Always remember that the TIP of the line does cutting. You will achieve better results by not crowding the line into the cutting area. Allow the unit to trim at its own pace.

1.Hold the unit so the head is off the ground and is tilted about 20 degrees toward the sweep direction.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents T1006-93110010 Owner / Operator ManualSafety First Contents  4  Safety PrecautionsWork gear and clothing  5 Avoid Noise Problem Things to check before using your brushcutter 6  Things to check before starting up the engine 7  Things to be careful about when using Your brushcutterBrushcutter  8  9  Set upInstalling Cutting Head Connecting Switch Wires 10  Putting on Waist PAD BC4400DW only 11  Fuel 12  OperationStarting Engine For BC2300DL/BC2600DL/BC3400DL 13  Adjusting Idling SpeedStopping Engine Line Head Usage Warning 14  Adjusting the Line Length 15  Optional blade usageOPT3  16 OPT4 For BC3400DL OPT5 OPT6 Bracket HandleOPT7 OPT8  17 Operation Controlling Blade Bounce  18 What causes kick out How you can reduce the chance of kick out 19  Maintenance BladeOPT9 How you can maintain the best control 20  MaintenanceRefilling Trimming Line AIR Filter 21  Storage Procedures to be Performed After Every 100 Hours of USE 22  Intake AIR Cooling Vent Warning 23  SpecificationsBC2300DL BC2600DLBC3400DL  24  25   26  Drive Unit BC2300DL & BC2600DLDescription Part Number Qty Key#  27  28  Engine Unit BC2300DL 29   30  Engine Unit BC2600DL 31   32  Drive Unit BC3400DL S/N 980101 and up 33   34  Engine Unit BC3400DL S/N 980101 and up 35   36  Drive Unit BC4400DW S/N 980101 and up 37   38  Engine Unit BC4400DW S/N 980101 and up 39  Manufacturers Warranty Coverage Red Max TRIMMER/BRUSHCUTTER Garantie limitée à 2 ans Emission Control Label Komatsu Zenoah America INC

BC2600DL, BC3400DL, BC2300DL, BC4400DW specifications

The RedMax BC2300DL, BC3400DL, BC2600DL, and BC4400DW are a series of advanced backpack blowers designed to meet the needs of both professional landscapers and homeowners. Their blend of power, efficiency, and user-friendly features makes them standout tools in the outdoor equipment market.

Starting with the BC2300DL, this model is designed for those who require a lightweight yet powerful solution for clearing leaves and debris. It features a 22.5cc two-stroke engine that delivers impressive performance while maintaining low fuel consumption. The blower is equipped with an ergonomic backpack frame and padded harness, ensuring comfort during extended use. The BC2300DL also incorporates a cruise control feature that allows users to maintain a steady blower speed without having to constantly adjust the throttle.

Moving to the BC2600DL, this model increases power output with a 25.4cc engine. It is engineered for users who tackle larger areas or more stubborn debris. The BC2600DL boasts a high airflow rate, making it effective for moving wet leaves and larger piles of debris. The blower's lightweight design and advanced anti-vibration technology help reduce operator fatigue, allowing for longer working hours with less strain.

The BC3400DL takes performance up a notch with its 34cc engine, providing even greater air volume and velocity. This model is perfect for professional landscapers who demand efficiency and reliability. The robust frame and durable components ensure that the BC3400DL can handle the rigors of daily use while the easy-start system reduces pull effort and ensures reliable ignition in various weather conditions.

Lastly, the BC4400DW is the powerhouse of the lineup, featuring a 44cc engine that offers maximum airflow and speed for heavy-duty applications. This model is ideal for users who frequently work in challenging environments and need a blower that can handle large debris and tough cleaning tasks. The dual-stage air filtration system enhances durability and performance, while the reinforced frame and heavy-duty components ensure longevity.

All models are backed by RedMax's commitment to quality, featuring easy maintenance and reliable performance. Their innovative technologies, such as lightweight materials, ergonomic designs, and advanced engine technology, enable users to efficiently tackle outdoor cleaning tasks. Whether for professional landscaping or home maintenance, RedMax blowers offer a perfect combination of power and comfort.
Top Page Image Contents