Muffler, Spark Arrester, AIR Inlet NET

EBZ3050RH

9. Maintenance

F17

■MUFFLER

WARNING

•Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leakage is found, do not use the blower and have it repaired immediately.

•Note that failing to do so may result in the engine catching on fire.

IMPORTANT

•Before starting operation, always make sure to check if the muffler is properly held by two bolts (F17 (2)). (Fastening Torque : 7 to 11 N·m)

•Also make sure that the spark arrester and the diffuser are properly attached with two bolts (F17 (1)). (Fastening Torque : 2 to 3 N·m)

•Even if one of four bolts is loose, it may result in engine catching on fire.

(1)Bolt

(2)Bolt

(3)Spark arrester

(4)Diffuser

■SPARK ARRESTER

F19

F20

net. When air flow has dropped down during operation, stop the engine and inspect the air inlet net for blocking by obstacles.

• Note that failure to remove any such

obstacles may result in the engine

becoming overheated and damaged.

(1) Net

WARNING

Never use the blower without the net of the blower. Before each use, check that the net is attached in place and is free from any damage.

■IGNITION COIL AIR GAP INSPECTION

•If the gap is out of standard or when installing the coil or rotor, adjust the air gap between the ignition coil and the iron core of the rotor.

Air Gap:

0.3~ 0.4mm 0.012 ~ 0.016"

(1)Rotor

(2)Ignition coil

F18

•The muffler is equipped with a spark arrester to prevent red hot carbon from flying out of the exhaust outlet. Periodically inspect and clean as necessary with a wire brush. In the State of California it is required by law (Section 4442 of the California Pulic Resources Code) to equip a spark arrester when a gas powered tool is used in any forest covered, bush covered, or grass covered unimproved land.

■PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time.

2.Tighten all screws, bolts, and fittings.

■AIR INLET NET

IMPORTANT

• Blowing air is taken in from the air inlet

F21
(1)
(2)
(3)	(4)
	(4)

■SHOLDER STRAP

•If the shoulder strap is damaged it may break during use, thus causing the product to fall and resulting in personal injury. Follow the instructions below to replace the shoulder strap with new one.

1.Hook the upper part of the shoulder strap at the notch on the top of the frame and pass it through the buckle as shown in the figure, then secure it firmly.

2.Put the hook at the lower part of the shoulder strap in the strap installing location at the bottom of the frame.

(1)Buckle

(2)Frame

(3)Hook

(4)D-ring

US-13

EBZ3050RH specifications

The RedMax EBZ3050RH is a powerful and efficient backpack blower designed for professionals and serious landscapers, providing the perfect combination of performance, comfort, and durability. Known for its robust build and high-performance capabilities, this model has carved a notable niche in the outdoor power equipment market.

One of the standout features of the EBZ3050RH is its impressive engine. Equipped with a 50.2cc 2-stroke engine, it delivers an air volume of 765 cubic feet per minute (CFM) at an air speed of 220 miles per hour (MPH). This combination ensures that users can effectively clear debris, leaves, and grass clippings from large areas in a fraction of the time compared to less powerful models. The engine is also designed with efficient fuel consumption in mind, allowing for extended operation times without frequent refueling.

Another significant characteristic of the EBZ3050RH is its ergonomic design. The backpack blower features adjustable padded straps and a comfortable backrest, which helps to distribute weight evenly, reducing fatigue during prolonged use. This thoughtful design is particularly beneficial for professionals who spend long hours on landscaping tasks, ensuring that they can work efficiently without sacrificing comfort.

Technology plays a crucial role in the performance of the EBZ3050RH. The blower incorporates a unique anti-vibration system that minimizes vibrations reaching the user's hands and arms, further enhancing comfort and control. Additionally, the blower is equipped with a cruise control feature, allowing users to maintain a constant airspeed without having to keep their finger on the throttle, which reduces strain during lengthy jobs.

Durability is another hallmark of the RedMax EBZ3050RH. Built with high-quality materials, the blower can withstand the rigors of frequent use in commercial applications. The design includes a durable casing and reliable components that ensure longevity, making it a valuable investment for any professional landscaper.

In summary, the RedMax EBZ3050RH combines a powerful engine, ergonomic design, advanced technology, and robust durability, making it an ideal choice for those looking to tackle demanding landscaping tasks. With its high performance and user-friendly features, the EBZ3050RH stands out as a leading option in the backpack blower market, catering to the needs of both commercial users and dedicated gardening enthusiasts.